RSVP NX MMT

The RSVP NX MMT is a Single Sided mod created by Mr.LSC as an upgrade of the RSVP MMx / RSVP MMT mod.

Construction

Parts needed

List from Penspinning.fr's post:

• 1x RSVP (Everything)
• 1x HGG (tip)
• 1x Pilot G2 (Body and clicker)

Additional Items

• Blu-tak/ teflon tape
• An insert (Optional)

Text tutorial

1. Unscrew the tip from HGG pen.
2. Remove RSVP pen's cap and break off clip.
3. (Optional) Add an insert inside the RSVP body.
4. Remove RSVP pen's grip and insert it in the cap.
5. Place the RSVP cap behind the pen.
6. Disassemble the G2 body and cut 5 cm from the "screw" part.
7. File the bump on the front of the RSVP until G2 body fit
8. (Optional) Sand the front further to fit an insert beneath the G2 barrel.
9. Fit the small G2 clicker piece into the HGG tip, using adhesive putty to secure it.
10. Place the G2 clicker with the HGG tip on tip part of the RSVP
11. Assemble the G2 body on the front of the RSVP

Video Tutorial

Video Tutorial by Oleg.