RSVP MMx / RSVP MMT

The RSVP MMx / RSVP MMT is a Single Sided mod created by Kam. This mod is a variation of the RSVP MX mod using Pilot G2 body for its front structure.

The original name of the mod is "Momentum MX" (RSVP MMx), but due to a naming error by koreans, it also has "RSVP Mx MomenTum" (RSVP MMT) as another name.

Construction

Parts needed

List from Penspinning.fr's post:

• 1x RSVP (Everything)
• 1x HGG (tip)
• 1x Pilot G2 (body)

Additional items

• Blu-tak/ Teflon tape
• An insert (Optional)

Text tutorial

1. Unscrew the tip from HGG pen.
2. Remove RSVP pen's cap and break off clip.
3. (Optional) Add an insert inside the RSVP body.
4. (Optional) Make a hole in the RSVP backplug and insert the inktube into the pen backwards.
5. Remove RSVP pen's grip and insert it in the cap.
6. Place the RSVP cap behind the pen.
7. Disassemble the G2 and cut a 3.9 cm rear barrel section from the threaded end. Retain the thread for MMx; remove it for MMT. File the cut edge.
8. File the bump on the front of the RSVP until G2 body fit
9. Screw on/add blu-tak/Teflon tape/to the RSVP's front tip area. Add the HGG tip onto it.
10. Assemble the G2 body on the front of the RSVP