RSVP NX MMT

The RSVP NX MMT is a Single Sided mod created by Mr.LSC as an upgrade of the RSVP MMx / RSVP MMT mod.

Construction

Parts needed

List from Penspinning.fr's post:

• 1x RSVP (Everything)
• 1x HGG (tip)
• 1x Pilot G2 (Body and clicker)

Additional Items

• Blu-tak/ teflon tape
• An insert (Facultative)

Text Tutorial

1. Unscrew the tip from HGG pen.
2. Remove RSVP pen's cap and break off clip.
3. (Facultative) Add an insert inside the RSVP body.
4. Poke a hole in the RSVP backplug and insert the inktube into the pen backwards.
5. Remove RSVP pen's grip and insert it in the cap.
6. Place the RSVP cap behind the pen.
7. Disassemble the G2 body and cut 5cm from the "screw" part.
8. File the bump on the front of the RSVP until G2 body fit
9. (Facultative) File more and add an insert on the of the RSVP
10. Screw on/add blu-tak/teflon tape/to the RSVP's front tip area.
11. Add a bit of blu-tak/teflon tape/to the G2 clicker /inside the HGG tip and assemble.
12. Put the G2 clicker with the HGG tip on tip part of the RSVP
13. Assemble the G2 body on the front of the RSVP

Video Tutorial

Video Tutorial by Oleg.