Lakubo Jell: Difference between revisions
From Fen Spinner Wiki
More actions
mNo edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|style= [[Single Sided]] | |style= [[Single Sided]] | ||
|length= 20cm | |length= 20cm | ||
|weight=16g | |weight= 16g | ||
|cog=COP (depends on the cutgrip) | |cog=COP (depends on the cutgrip) | ||
}} | }} | ||
The '''Lakubo Jell''' is a mod invented by [[Ryo]]. | The '''Lakubo Jell''' is a mod invented by [[Ryo]]. | ||
The mod was popularized by [[Jeb]] spinner [[Ayatori]] when he used it in both [[Pen Spinning World Tournament 2007|WT07]] and [[Pen Spinning World Cup 2008|WC08]]. It is also commonly called "Ayatori mod" | The mod was popularized by [[Jeb]] spinner [[Ayatori]] when he used it in both [[Pen Spinning World Tournament 2007|WT07]] and [[Pen Spinning World Cup 2008|WC08]]. It is also commonly called the "Ayatori mod." | ||
==Construction== | ==Construction== | ||
| Line 16: | Line 16: | ||
===Parts needed=== | ===Parts needed=== | ||
Parts list from Penspinning.fr<ref>[https://www.penspinning.fr/lakubo-jell-1588 Penspinning.fr]</ref> | |||
* | * 1x [[Uni-Ball Lakubo]] (Everything except inktube) | ||
* | * 2x [[Uni-Ball Signo]](tips) | ||
* 1 [[Uni-Ball 0.7]] | * 1 [[Uni-Ball 0.7]](grip) | ||
* 2 [[Zebra Hyper Jell| Zebra Hyper Jell / Jimnie Jell]] | * 2 [[Zebra Hyper Jell| Zebra Hyper Jell / Jimnie Jell]](cap and grip) | ||
====Additional | ====Additional items=== | ||
* 1/2/3 inserts (One for the body, one under the gripcut and one inside the cap) ( | * 1/2/3 inserts (One for the body, one under the gripcut and one inside the cap) (Optional) | ||
===Text tutorial=== | ===Text tutorial=== | ||
# Cut the clip | # Cut the clip from the Zebra Hyper Jell / Jimnie Jell cap. | ||
# Open the Lakubo, | # Open the Lakubo, and remove the ink. If you don't add an insert, screw the back plug back | ||
# (Facultative) Put an insert and screw the backplug back | # (Facultative) Put an insert and screw the backplug back | ||
# (Facultative) Cut a pattern on the 0.7 grip | # (Facultative) Cut a pattern on the 0.7 grip | ||
# Screw | # Screw the Signo tip on the front of the Lakubo barrel | ||
# (Facultative) Roll an insert on the Lakubo grip before putting the 0.7 | # (Facultative) Roll an insert on the Lakubo grip before putting the 0.7 grip (Use cellophane tape if needed) | ||
# Add the 0.7 onto the Lakubo grip (On the insert if there is one) | # Add the 0.7 onto the Lakubo grip (On the insert if there is one) | ||
# Put a Signo tip inside the Zebra Hyper Jell / Jimnie Jell cap then add the Zebra Hyper Jell / Jimnie Jell grip in it. ((Facultative) Roll an insert on the Zebra Hyper Jell / Jimnie Jell grip) | # Put a Signo tip inside the Zebra Hyper Jell / Jimnie Jell cap then add the Zebra Hyper Jell / Jimnie Jell grip in it. ((Facultative) Roll an insert on the Zebra Hyper Jell / Jimnie Jell grip) | ||
# Assemble the Zebra Hyper Jell / Jimnie Jell cap on the Lakubo backplug by putting the backplug inside the grip inside the Zebra Hyper Jell / Jimnie Jell | # Assemble the Zebra Hyper Jell / Jimnie Jell cap on the Lakubo backplug by putting the backplug inside the grip inside the Zebra Hyper Jell / Jimnie Jell. | ||
==References== | ==References== | ||
[[Category:Pen Mods]] | [[Category:Pen Mods]] | ||
Revision as of 10:34, 28 August 2026
The Lakubo Jell is a mod invented by Ryo.
The mod was popularized by Jeb spinner Ayatori when he used it in both WT07 and WC08. It is also commonly called the "Ayatori mod."
Construction
Parts needed
Parts list from Penspinning.fr[1]
- 1x Uni-Ball Lakubo (Everything except inktube)
- 2x Uni-Ball Signo(tips)
- 1 Uni-Ball 0.7(grip)
- 2 Zebra Hyper Jell / Jimnie Jell(cap and grip)
=Additional items
- 1/2/3 inserts (One for the body, one under the gripcut and one inside the cap) (Optional)
Text tutorial
- Cut the clip from the Zebra Hyper Jell / Jimnie Jell cap.
- Open the Lakubo, and remove the ink. If you don't add an insert, screw the back plug back
- (Facultative) Put an insert and screw the backplug back
- (Facultative) Cut a pattern on the 0.7 grip
- Screw the Signo tip on the front of the Lakubo barrel
- (Facultative) Roll an insert on the Lakubo grip before putting the 0.7 grip (Use cellophane tape if needed)
- Add the 0.7 onto the Lakubo grip (On the insert if there is one)
- Put a Signo tip inside the Zebra Hyper Jell / Jimnie Jell cap then add the Zebra Hyper Jell / Jimnie Jell grip in it. ((Facultative) Roll an insert on the Zebra Hyper Jell / Jimnie Jell grip)
- Assemble the Zebra Hyper Jell / Jimnie Jell cap on the Lakubo backplug by putting the backplug inside the grip inside the Zebra Hyper Jell / Jimnie Jell.