Lakubo Jell
The Lakubo Jell is a mod invented by Ryo.
The mod was popularized by Jeb spinner Ayatori when he used it in both WT07 and WC08. It is also commonly called "Ayatori mod"
Construction
Parts needed
List from Penspinning.fr[1]
- 1 Uni-Ball Lakubo (Everything except inktube)
- 2 Uni-Ball Signo(tips)
- 1 Uni-Ball 0.7(Grip)
- 2 Zebra Hyper Jell / Jimnie Jell(Cap and grip)
Additional Items
- 1/2/3 inserts (One for the body, one under the gripcut and one inside the cap) (Facultative)
Text tutorial
- Cut the clip of the Zebra Hyper Jell / Jimnie Jell cap
- Open the Lakubo, rand emove the ink. If you don't add an insert, screw the Backplug back
- (Facultative) Put an insert and screw the backplug back
- (Facultative) Cut a pattern on the 0.7 grip
- Screw a Signo tip on the front of the Lakubo barrel
- (Facultative) Roll an insert on the Lakubo grip before putting the 0.7 grips (Use cellophane tape if needed)
- Add the 0.7 onto the Lakubo grip (On the insert if there is one)
- Put a Signo tip inside the Zebra Hyper Jell / Jimnie Jell cap then add the Zebra Hyper Jell / Jimnie Jell grip in it. ((Facultative) Roll an insert on the Zebra Hyper Jell / Jimnie Jell grip)
- Assemble the Zebra Hyper Jell / Jimnie Jell cap on the Lakubo backplug by putting the backplug inside the grip inside the Zebra Hyper Jell / Jimnie Jell