Itezy-3

The Itezy-3 is a personal single sided mod made by JEB spinner Iteza.

Construction

Parts needed

List from the video below:

• 1x G3 (barrel, grip and plastic tip)
• 2x Signo Dx (tips and one grip)
• 1x Hyperjell (cap and grip)
• 1x Hi-Tec (tip)
• 1x Anyball (grip)
• 1x Pilot G2 (grip)

Additional Items

• Tape
• An insert

Text tutorial

Preparation

1. Cut the clip of the Hyperjell cap.
2. Cut the Hyperjell grip to 2.9cm.
3. Cut 1cm of Signo DX grip.
4. Cut 6 blocks of Anyball grip.

Assembly

Front side

1. Overgrip the G3 grip with 1cm of Signo dx grip.
2. (With the plastic tip screwed on the body) stack the tips in this order: G3 tip, Signo tip, and Hitec tip.
3. Put the G2 grip on the front of the G3 body flat part first, the stripped part should cover the tip stack.
4. Overgrip the stripes of G2 grips with 6 blocks of anyball grip.

Cap side

1. Put the base of a Signo tip inside the 2.9cm Hyperjell grip.
2. Push the Signo tip and Hyperjell grip inside the Hyperjell cap.
3. Add tape on the G3 body then connect it to the Hyperjell cap.

Video tutorial

Video tutorial by Iteza.