RSVP NX MMT: Difference between revisions

Latest revision as of 22:01, 11 December 2024

The RSVP NX MMT is a Single Sided mod created by Mr.LSC as an upgrade of the RSVP MMx / RSVP MMT mod.

Construction

Parts needed

List from Penspinning.fr's post:^[1]

1x RSVP (Everything)
1x HGG (tip)
1x Pilot G2 (Body and clicker)

Additional Items

Blu-tak/ teflon tape
An insert (Facultative)

Text Tutorial

Unscrew the tip from HGG pen.
Remove RSVP pen's cap and break off clip.
(Facultative) Add an insert inside the RSVP body.
Poke a hole in the RSVP backplug and insert the inktube into the pen backwards.
Remove RSVP pen's grip and insert it in the cap.
Place the RSVP cap behind the pen.
Disassemble the G2 body and cut 5cm from the "screw" part.
File the bump on the front of the RSVP until G2 body fit
(Facultative) File more and add an insert on the of the RSVP
Screw on/add blu-tak/teflon tape/to the RSVP's front tip area.
Add a bit of blu-tak/teflon tape/to the G2 clicker /inside the HGG tip and assemble.
Put the G2 clicker with the HGG tip on tip part of the RSVP
Assemble the G2 body on the front of the RSVP

Video Tutorial

Video Tutorial by Oleg.

References

↑ https://www.penspinning.fr/rsvp-nx-mmt-910

[Penspinning.fr-1] ttps://www.penspinning.fr/rsvp-nx-mmt-910

[1]

@@ Line 22: / Line 22: @@
 ===Text Tutorial===
 # Unscrew the tip from HGG pen.
-# Remove [[Pentel RSVP|RSVP]] pen's cap and break off clip.
+# Remove RSVP pen's cap and break off clip.
-# (Facultative) Add an insert inside the [[Pentel RSVP|RSVP]] body.
+# (Facultative) Add an insert inside the RSVP body.
-# Poke a hole in the [[Pentel RSVP|RSVP]] backplug and insert the inktube into the pen backwards.
+# Poke a hole in the RSVP backplug and insert the inktube into the pen backwards.
-# Remove [[Pentel RSVP|RSVP]] pen's grip and insert it in the cap.
+# Remove RSVP pen's grip and insert it in the cap.
-# Place the [[Pentel RSVP|RSVP]] cap behind the pen.
+# Place the RSVP cap behind the pen.
-# Disasemble the [[Pilot G2]] body and cut 5cm from the "screw" part.
+# Disassemble the G2 body and cut 5cm from the "screw" part.
-# File the bump on the front of the [[Pentel RSVP|RSVP]] until [[Pilot G2]] body fit
+# File the bump on the front of the RSVP until G2 body fit
-# (Facultative) File more and add an insert on the of the [[Pentel RSVP|RSVP]]
+# (Facultative) File more and add an insert on the of the RSVP
-# Screw on/add blu-tak/teflon tape/to the [[Pentel RSVP|RSVP]]'s front tip area.
+# Screw on/add blu-tak/teflon tape/to the RSVP's front tip area.
-# Add a bit of blu-tak/teflon tape/to the [[Pilot G2]] clicker /inside the [[Hybrid Gel Grip|HGG]] tip and assemble.
+# Add a bit of blu-tak/teflon tape/to the G2 clicker /inside the HGG tip and assemble.
-# Put the [[Pilot G2]] clicker with the [[Hybrid Gel Grip|HGG]] tip on tip part of the [[Pentel RSVP|RSVP]]
+# Put the G2 clicker with the HGG tip on tip part of the RSVP
-# Assemble the [[Pilot G2]] body on the front of the [[Pentel RSVP|RSVP]]
+# Assemble the G2 body on the front of the RSVP
 ===Video Tutorial===