Lakubo Jell: Difference between revisions

Revision as of 19:15, 1 October 2026

The Lakubo Jell is a mod invented by Ryo.

The mod was popularized by Jeb spinner Ayatori when he used it in both WT07 and WC08. It is also commonly called the "Ayatori mod."

Construction

Parts needed

Parts list from Penspinning.fr^[1]

1x Uni-Ball Lakubo (Everything except inktube)
2x Uni-Ball Signo(tips)
1 Uni-Ball 0.7(grip)
1x Hyperjell / Jimnie Jell (cap and grip)

Additional items

1/2/3 inserts (One for the body, one under the gripcut and one inside the cap) (Optional)

Text tutorial

Cut and smooth the Hyperjell or Jimnie Jell cap clip.
Open the Lakubo and remove its ink tube.
Add an insert inside the barrel if desired, then screw the backplug into place.
Optionally cut a decorative pattern into the 0.7 grip.
Screw a Signo tip onto the Lakubo front.
Optionally wrap an insert around the Lakubo grip, securing it with clear tape.
Fit the 0.7 grip over the Lakubo grip and any insert.
Optionally wrap an insert around the Hyperjell or Jimnie Jell grip.
Place the second Signo tip inside the cap, followed by the Hyperjell or Jimnie Jell grip.
Fit the Lakubo backplug into the grip inside the prepared cap. Add a few turns of tape around the backplug as needed to secure the cap.

References

↑ Penspinning.fr

[1] Penspinning.fr

[1]

@@ Line 20: / Line 20: @@
 * 2x [[Uni-Ball Signo]](tips)
 * 1 [[Uni-Ball 0.7]](grip)
-* 2 [[Zebra Hyper Jell| Zebra Hyper Jell / Jimnie Jell]](cap and grip)
+* 1x [[Zebra Hyper Jell|Hyperjell / Jimnie Jell]] (cap and grip)
-====Additional items===
+====Additional items====
 * 1/2/3  inserts (One for the body, one under the gripcut and one inside the cap) (Optional)
 ===Text tutorial===
-# Cut the clip from the Zebra Hyper Jell / Jimnie Jell cap.
+# Cut and smooth the Hyperjell or Jimnie Jell cap clip.
-# Open the Lakubo, and remove the ink. If you don't add an insert, screw the back plug back
+# Open the Lakubo and remove its ink tube.
-# (Optional) Put an insert and screw the backplug back
+# Add an insert inside the barrel if desired, then screw the backplug into place.
-# (Optional) Cut a pattern on the 0.7 grip
+# Optionally cut a decorative pattern into the 0.7 grip.
-# Screw the Signo tip on the front of the Lakubo barrel
+# Screw a Signo tip onto the Lakubo front.<br>[[File:LakuboJellFrontTip.jpg|left|thumb|200px]]<br clear=all>
-# (Optional) Roll an insert on the Lakubo grip before putting the 0.7 grip (Use cellophane tape if needed)
+# Optionally wrap an insert around the Lakubo grip, securing it with clear tape.<br>[[File:LakuboJellFrontInsert.jpg|left|thumb|200px]]<br clear=all>
-# Add the 0.7 onto the Lakubo grip (On the insert if there is one)
+# Fit the 0.7 grip over the Lakubo grip and any insert.
-# (Optional) Roll an insert around the Zebra Hyper Jell / Jimnie Jell grip
+# Optionally wrap an insert around the Hyperjell or Jimnie Jell grip.<br>[[File:LakuboJellRearInsert.jpg|left|thumb|200px]]<br clear=all>
-# Put a Signo tip inside the  Zebra Hyper Jell / Jimnie Jell cap then add the  Zebra Hyper Jell / Jimnie Jell grip in it.
+# Place the second Signo tip inside the cap, followed by the Hyperjell or Jimnie Jell grip.<br>[[File:LakuboJellRearAssembly.jpg|left|thumb|200px]]<br clear=all>
-# Assemble the  Zebra Hyper Jell / Jimnie Jell cap on the Lakubo backplug by putting the backplug inside the grip inside the  Zebra Hyper Jell / Jimnie Jell.
+# Fit the Lakubo backplug into the grip inside the prepared cap. Add a few turns of tape around the backplug as needed to secure the cap.<br>[[File:LakuboJellFinished.jpg|left|thumb|200px]]<br clear=all><br>[[File:LakuboJellCapFit.jpg|left|thumb|200px]]<br clear=all>
 ==References==
+<references />
 [[Category:Pen Mods]]