Saizen G3

The Saizen G3 is a single-sided mod made by JEB spinner Saizen. This mod is a variation of the GJH mod. As Saizen never released its tutorial, the mod presented here is a replica.

Construction

Parts needed

List from the UPSB V3:

• 1x G3 (barrel and cap)
• 1x Jedo (tip)
• 1x Uni-Ball Signo (Tip)
• 2x HGG (2 tips and 2 grip)
• 1x Dong-A Anyball (grip)
• 3x Pentel Hybrid Gel Roller (tips)
• 1x G-Spec MP (outer and inner grip)
• 1x Pilot AirBlanc (grip)

Additional Items

• Tape
• An insert
• Glue

Text tutorial

Preparation

1. Cut a small section and the ring of one HGG grip.
2. Cut your G-spec grip to slightly longer than the previous step
3. Cut 2x 3 blocks of Anyball grip.
4. Prepare the G3 barrel by filing the square and front bump.

Assembly

Front side

1. Add 3 blocks of anyball grip and the HGG grip at the front of the G3.
2. Stack the tips inside the HGG grip: Jedo, Hgg, and 2 HGR tips.
3. Wrap some tape around the tipstack and add 3 Anyball blocks onto it
4. Overgrip the HGG grip with an Airblanc grip.

Cap side

1. Put the Signo tip, HGR tip, HGG tip, and the G-spec inner grip.
2. Put the HGG small part onto the G3 cap, overgrip it with the cut outer grip of G-spec
3. Add some tape on the end of the G3 barrel, then connect the G3 cap to it.