Coffeelucky MX: Difference between revisions

← Older edit

Latest revision as of 18:32, 1 October 2026

The Coffeelucky MX is a Single Sided mod created by THPSC spinner Coffy.

Construction

Parts needed

Parts and construction from Penmodding.pm.^[1]

1x RSVP (Everything)
1x Pilot Supergrip (ballpoint version; grip and tip)
1x Pentel Hybrid Gel Grip (grip)
1x Pilot G3 (Metal tip)

Additional Items

Tape
An insert

Text tutorial

Preparation

Remove the RSVP cap clip.
If you want the mod to write from the rear, drill a hole in the RSVP backplug for the ink-tube nib.
Cut a six-ring section of SuperGrip grip.

Assembly

If reversing the ink tube, pass its nib through the backplug hole and refit the backplug.
Remove the RSVP grip and insert it into the cap. Attach the cap to the rear of the barrel.
Wrap tape around the RSVP front and its tip, then fit the six-ring SuperGrip section.
Stack the SuperGrip ballpoint tip over the RSVP tip, then fit the metal G3 tip over the SuperGrip tip.
Cover the tip stack with the HGG grip. Add an optional insert to the barrel.

Video tutorial

Video tutorial by Coffy.

References

↑ Coffeelucky MX tutorial on Penmodding.pm

[1] Coffeelucky MX tutorial on Penmodding.pm

[1]

@@ Line 13: / Line 13: @@
 ===Parts needed===
+Parts and construction from Penmodding.pm.<ref>[https://penmodding.pm/archives/5501 Coffeelucky MX tutorial on Penmodding.pm]</ref>
 * 1x [[Pentel RSVP|RSVP]] (Everything)
-* 1x [[Pilot Supergrip]] (grip and tip)
+* 1x [[Pilot Supergrip]] (ballpoint version; grip and tip)
 * 1x [[Pentel Hybrid Gel Grip]] (grip)
 * 1x [[Pilot G3]] (Metal tip)
 ====Additional Items====
-* Blu-tak/ teflon tape
+* Tape
 * An insert
-===Text Tutorial===
+===Text tutorial===
+====Preparation====
+# Remove the RSVP cap clip.
+# If you want the mod to write from the rear, drill a hole in the RSVP backplug for the ink-tube nib.
+# Cut a six-ring section of SuperGrip grip.
-====Preparation====
-# Cut the clip of the RSVP cap.
-# Poke a hole in the RSVP backplug.
-# Cut 6 blocks of Supergrip grip.
 ====Assembly====
-# Insert the ink tube into the backplug hole, then reassemble it on the RSVP.
+# If reversing the ink tube, pass its nib through the backplug hole and refit the backplug.
-# Remove the RSVP pen's grip and insert it in the cap.
+# Remove the RSVP grip and insert it into the cap. Attach the cap to the rear of the barrel.
-# Place the RSVP cap on the back of the pen.
+# Wrap tape around the RSVP front and its tip, then fit the six-ring SuperGrip section.
-# Add tape or Blu-Tack to the front of the RSVP, then stack the Supergrip and G3 tip onto it.
+# Stack the SuperGrip ballpoint tip over the RSVP tip, then fit the metal G3 tip over the SuperGrip tip.<br>[[File:CoffeeluckyMXTipStack.jpg|left|thumb|200px]]<br clear=all>
-# Place the Supergrip grip and HGG grip on the front of the pen.
+# Cover the tip stack with the HGG grip. Add an optional insert to the barrel.
 ===Video tutorial===