Lakubo Jell: Difference between revisions

Latest revision as of 19:21, 1 October 2026

The Lakubo Jell is a mod invented by Ryo.

The mod was popularized by Jeb spinner Ayatori when he used it in both WT07 and WC08. It is also commonly called the "Ayatori mod."

Construction

Parts needed

Parts list from Penspinning.fr^[1]

1x Uni-Ball Lakubo (Everything except inktube)
2x Uni-Ball Signo(tips)
1 Uni-Ball 0.7(grip)
1x Hyperjell / Jimnie Jell (cap and grip)

Additional items

1/2/3 inserts (One for the body, one under the gripcut and one inside the cap) (Optional)

Text tutorial

Cut and smooth the Hyperjell or Jimnie Jell cap clip.
Open the Lakubo and remove its ink tube.
Add an insert inside the barrel if desired, then screw the backplug into place.
Optionally cut a decorative pattern into the 0.7 grip.
Screw a Signo tip onto the Lakubo front.
Optionally wrap an insert around the Lakubo grip, securing it with clear tape.
Fit the 0.7 grip over the Lakubo grip and any insert.
Optionally wrap an insert around the Hyperjell or Jimnie Jell grip.
Place the second Signo tip inside the cap, followed by the Hyperjell or Jimnie Jell grip.
Fit the Lakubo backplug into the grip inside the prepared cap. Add a few turns of tape around the backplug as needed to secure the cap.

References

↑ Penspinning.fr

[1] Penspinning.fr

[1]

@@ Line 5: / Line 5: @@
 |style= [[Single Sided]]
 |length= 20cm
-|weight=16g
+|weight= 16g
 |cog=COP (depends on the cutgrip)
 }}
 The '''Lakubo Jell''' is a mod invented by [[Ryo]].
-The mod was popularized by [[Jeb]] spinner [[Ayatori]] when he used it in both [[Pen Spinning World Tournament 2007|WT07]] and [[Pen Spinning World Cup 2007|WC08]]. It is also commonly called "Ayatori mod"
+The mod was popularized by [[Jeb]] spinner [[Ayatori]] when he used it in both [[Pen Spinning World Tournament 2007|WT07]] and [[Pen Spinning World Cup 2008|WC08]]. It is also commonly called the "Ayatori mod."
 ==Construction==
@@ Line 16: / Line 16: @@
 ===Parts needed===
-List from Penspinning.fr<ref>[https://www.penspinning.fr/lakubo-jell-1588 Penspinning.fr]</ref>
+Parts list from Penspinning.fr<ref>[https://www.penspinning.fr/lakubo-jell-1588 Penspinning.fr]</ref>
-* 1 [[Uni-Ball Lakubo]] (Everything except inktube)
+* 1x [[Uni-Ball Lakubo]] (Everything except inktube)
-* 2 [[Uni-Ball Signo]]（tips)
+* 2x [[Uni-Ball Signo]](tips)
-* 1 [[Uni-Ball 0.7]]（Grip)
+* 1 [[Uni-Ball 0.7]](grip)
-* 2 [[Zebra Hyper Jell| Zebra Hyper Jell / Jimnie Jell]]（Cap and grip）
+* 1x [[Zebra Hyper Jell|Hyperjell / Jimnie Jell]] (cap and grip)
-====Additional Items====
+====Additional items====
-* 1/2/3  inserts (One for the body, one under the gripcut and one inside the cap) (Facultative)
+* 1/2/3  inserts (One for the body, one under the gripcut and one inside the cap) (Optional)
 ===Text tutorial===
-# Cut the clip of the Zebra Hyper Jell / Jimnie Jell cap
+# Cut and smooth the Hyperjell or Jimnie Jell cap clip.
-# Open the Lakubo, rand emove the ink. If you don't add an insert, screw the Backplug back
+# Open the Lakubo and remove its ink tube.
-# (Facultative) Put an insert and screw the backplug back
+# Add an insert inside the barrel if desired, then screw the backplug into place.
-# (Facultative) Cut a pattern on the 0.7 grip
+# Optionally cut a decorative pattern into the 0.7 grip.
-# Screw a Signo tip on the front of the Lakubo barrel
+# Screw a Signo tip onto the Lakubo front.<br>[[File:LakuboJellFrontTip.jpg|left|thumb|200px]]<br clear=all>
-# (Facultative) Roll an insert on the Lakubo grip before putting the 0.7 grips (Use cellophane tape if needed)
+# Optionally wrap an insert around the Lakubo grip, securing it with clear tape.<br>[[File:LakuboJellFrontInsert.jpg|left|thumb|200px]]<br clear=all>
-# Add the 0.7 onto the Lakubo grip (On the insert if there is one)
+# Fit the 0.7 grip over the Lakubo grip and any insert.
-# Put a Signo tip inside the  Zebra Hyper Jell / Jimnie Jell cap then add the  Zebra Hyper Jell / Jimnie Jell grip in it. ((Facultative) Roll an insert on the  Zebra Hyper Jell / Jimnie Jell grip)
+# Optionally wrap an insert around the Hyperjell or Jimnie Jell grip.<br>[[File:LakuboJellRearInsert.jpg|left|thumb|200px]]<br clear=all>
-# Assemble the  Zebra Hyper Jell / Jimnie Jell cap on the Lakubo backplug by putting the backplug inside the grip inside the  Zebra Hyper Jell / Jimnie Jell
+# Place the second Signo tip inside the cap, followed by the Hyperjell or Jimnie Jell grip.<br>[[File:LakuboJellRearAssembly.jpg|left|thumb|200px]]<br clear=all>
+# Fit the Lakubo backplug into the grip inside the prepared cap. Add a few turns of tape around the backplug as needed to secure the cap.<br>[[File:LakuboJellFinished.jpg|left|thumb|200px]]<br clear=all><br>
 ==References==
+<references />
 [[Category:Pen Mods]]