TBG Paper Mx: Difference between revisions
From Fen Spinner Wiki
More actions
Created page with "{{Mod Infobox |name= |image={{#setmainimage:TBG Paper MX.jpg}} |creator= TheBeyGeek |style= Double Sided |length= 21.1cm |weight= ~15g |cog= cop }} The '''TBG Paper MX''' is a double sided mod made by FPSB spinner TheBeyGeek which he used in Pen Spinning World Cup 2020 and multiple FPSBT. ==Construction== ===Parts needed=== List from TheBeyGeek's tutorial:<ref name="Tutorial">https://thefpsb.1fr1.net/t4316-thebeygeek-s-paper-mx</ref> * 2x Pil..." |
m →Text tutorial: Removed excessive redirect |
||
| (One intermediate revision by one other user not shown) | |||
| Line 25: | Line 25: | ||
===Text tutorial=== | ===Text tutorial=== | ||
==== | ====Preparation==== | ||
# Cut the new | # Cut the new Papermate Flexgrip Ultra body at the last stripe (the closest one to the backplug) | ||
# Cut your pencil at 3,5cm, sand it until it's able to fit inside a | # Cut your pencil at 3,5cm, sand it until it's able to fit inside a Papermate Flexgrip Ultra body. | ||
# Remove the clear section of the 2 clicker parts (this can be done by smashing the top section of the clicker with an hammer) | # Remove the clear section of the 2 clicker parts (this can be done by smashing the top section of the clicker with an hammer) | ||
# Cut 2x 2 stripe on each Carrefour mechanical pencil (you should have 4 pieces) | # Cut 2x 2 stripe on each Carrefour mechanical pencil (you should have 4 pieces) | ||
# Cut 2x 9mm of the | # Cut 2x 9mm of the Uni-Ball Signo Broad grip. | ||
# Cut 2x 5mm of | # Cut 2x 5mm of Zebra Z-grip grips (flat part), then cut 1mm of each 5mm grips. | ||
====Assembly==== | ====Assembly==== | ||
# Connect both new | # Connect both new Papermate Flexgrip Ultra body from the front side using the pencil. | ||
# Put the 9mm part of | # Put the 9mm part of Uni-Ball Signo Broad grip on the Reynolds 081 cap. | ||
# Overgrip it in this order: 4mm of | # Overgrip it in this order: 4mm of Zebra Z-grip grip, 4 stripes of Carrefour mechanical pencil grip then 1mm of Zebra Z-grip grip (a bit of the Uni-Ball Signo Broad grip should remain visible)<br>[[File:tbgpap1.jpg|left|thumb|200px]]<br clear=all> | ||
# Screw the Old | # Screw the Old Papermate Flexgrip Ultra on the end of the Reynolds 081 cap. | ||
# Put the | # Put the Pilot SuperGrip on the Reynolds 081 stripe side first on the cap to cover the tip, adjust the other grips. | ||
# Flat side first, overgrip the | # Flat side first, overgrip the Pilot SuperGrip grip with an enlarged Pilot G2 grip (can be done using pliers). The o-ring of the Pilot SuperGrip grip should remain visible and the visible part of the Uni-Ball Signo Broad grip should be covered<br>[[File:tbgpap2.jpg|left|thumb|200px]]<br clear=all> | ||
# Add the Clear part from the | # Add the Clear part from the Papermate Flexgrip Ultra backplug inside the Reynolds 081 cap.<br>[[File:tbgpap3.jpg|left|thumb|200px]]<br clear=all> | ||
# Repeat on the other side | # Repeat on the other side | ||
# Connect to the body | # Connect to the body | ||
Latest revision as of 22:18, 11 December 2024
The TBG Paper MX is a double sided mod made by FPSB spinner TheBeyGeek which he used in Pen Spinning World Cup 2020 and multiple FPSBT.
Construction
Parts needed
List from TheBeyGeek's tutorial:[1]
- 2x Pilot G2 (Grips)
- 2x Pilot SuperGrip (Grips)
- 2x Old Papermate Flexgrip Ultra（2 tips)
- 2x New Papermate Flexgrip Ultra (2 Body and 2 clear section from the clickers)
- 2x Reynolds 081 (Caps)
- 2x Zebra Z-grip (Grip)
- 2x Carrefour mechanical pencil (Grips)
- 1x Uni-Ball Signo Broad (Grip)
- 1x Pencil
Text tutorial
Preparation
- Cut the new Papermate Flexgrip Ultra body at the last stripe (the closest one to the backplug)
- Cut your pencil at 3,5cm, sand it until it's able to fit inside a Papermate Flexgrip Ultra body.
- Remove the clear section of the 2 clicker parts (this can be done by smashing the top section of the clicker with an hammer)
- Cut 2x 2 stripe on each Carrefour mechanical pencil (you should have 4 pieces)
- Cut 2x 9mm of the Uni-Ball Signo Broad grip.
- Cut 2x 5mm of Zebra Z-grip grips (flat part), then cut 1mm of each 5mm grips.
Assembly
- Connect both new Papermate Flexgrip Ultra body from the front side using the pencil.
- Put the 9mm part of Uni-Ball Signo Broad grip on the Reynolds 081 cap.
- Overgrip it in this order: 4mm of Zebra Z-grip grip, 4 stripes of Carrefour mechanical pencil grip then 1mm of Zebra Z-grip grip (a bit of the Uni-Ball Signo Broad grip should remain visible)
- Screw the Old Papermate Flexgrip Ultra on the end of the Reynolds 081 cap.
- Put the Pilot SuperGrip on the Reynolds 081 stripe side first on the cap to cover the tip, adjust the other grips.
- Flat side first, overgrip the Pilot SuperGrip grip with an enlarged Pilot G2 grip (can be done using pliers). The o-ring of the Pilot SuperGrip grip should remain visible and the visible part of the Uni-Ball Signo Broad grip should be covered
- Add the Clear part from the Papermate Flexgrip Ultra backplug inside the Reynolds 081 cap.
- Repeat on the other side
- Connect to the body
