Coulomb G3: Difference between revisions

Latest revision as of 13:28, 27 August 2026

The Coulomb G3 is a single sided mod made by JEB spinner Coulomb.

Construction

Parts needed

List from the FPSB V3^[1]:

1x G3 (barrel, grip and plastic tube)
1x Signo DX (tip and grip)
2x Hyperjell (cap and grip)
1x Pentel Hybrid Gel Grip (grip and tip)
1x Pilot Hi-Tec-C (tip)

Additional Items

Tape
An insert

Text tutorial

Preparation

Prepare the G3 barrel by sanding the round and square bumps on the front.
Cut the clip from the Hyperjell cap.
Cut two 0.5 cm sections of Signo DX grip.
Cut a 0.9 cm section and a 0.5 cm section of Hyperjell grip.

Assembly

Front side

Place one 0.5 cm section of Signo DX grip on the front of the G3 barrel.
Place the 0.9 cm section of Hyperjell grip after the Signo DX grip.
Screw the G3 tip onto the front of the G3 barrel.
Cover the remaining visible section of the G3 front and tip stack with the HGG grip, with the ring side first.
Place the Signo tip on the front.
Place the Hi-Tec tip on top of the Signo tip. The tip order is: G3 tip, Signo tip, then Hi-Tec tip.

Cap side

Place the HGG tip on the Hyperjell cap.
Place the larger section of Hyperjell grip on the cap.
Place the remaining 0.5 cm section of Signo DX grip after the Hyperjell grip.
Place the 0.5 cm Hyperjell grip section after the Signo DX grip.
Add tape, then attach the cap to the G3 body.

References

↑ https://thefpsb.penspinning.fr/viewtopic.php?f=41&t=129&p=988#p988

[Tutorial-1] ttps://thefpsb.penspinning.fr/viewtopic.php?f=41&t=129&p=988#p988

[1]

@@ Line 15: / Line 15: @@
 List from the FPSB V3<ref name="Tutorial">https://thefpsb.penspinning.fr/viewtopic.php?f=41&t=129&p=988#p988</ref>:
 * 1x [[Pilot G3|G3]] (barrel, grip and plastic tube)
-* 1x [[Uniball Signo|Signo DX]] (tip and grip)
+* 1x [[Uni-Ball Signo|Signo DX]] (tip and grip)
 * 2x [[Zebra Hyperjell|Hyperjell]] (cap and grip)
 * 1x [[Pentel Hybrid Gel Grip]] (grip and tip)
@@ Line 26: / Line 26: @@
 ====Preparation====
 # [[G3 Barrel Preparation|Prepare the G3 barrel]] by sanding the round and square bumps on the front.
-# Cut the clip of the Hyperjell cap.
+# Cut the clip from the Hyperjell cap.
-# Cut 2x 0.5 cm of Signo DX grip.
+# Cut two 0.5 cm sections of Signo DX grip.
-# Cut 0.9 cm and 0.5cm of Hyperjell grip.
+# Cut a 0.9 cm section and a 0.5 cm section of Hyperjell grip.
 ====Assembly====
 =====Front side=====
-# Put grips in this order on the front of the G3 barrel: 0.5 cm of Signo DX grip and 0.9 cm of
-# On the front of the G3 barrel, stack the tip in this order: G3 tip (screwed on G3), Signo then Hitec.
+# Place one 0.5 cm section of Signo DX grip on the front of the G3 barrel.
-# Cover the remaining visible part of G3 front and tipstack with an HGG grip (ring side first).
+# Place the 0.9 cm section of Hyperjell grip after the Signo DX grip.
+# Screw the G3 tip onto the front of the G3 barrel.
+# Cover the remaining visible section of the G3 front and tip stack with the HGG grip, with the ring side first.
+# Place the Signo tip on the front.
+# Place the Hi-Tec tip on top of the Signo tip. The tip order is: G3 tip, Signo tip, then Hi-Tec tip.
 =====Cap side=====
-# In this order, put in the Hyperjell cap: The HGG tip, the big section of Hyperjell grip, 0.5cm of Signo grip, and the 0.5cm section oh Hyperjell grip.
-# Add tape on the G3 body then connect it to the Hyperjell cap.
+# Place the HGG tip on the Hyperjell cap.
+# Place the larger section of Hyperjell grip on the cap.
+# Place the remaining 0.5 cm section of Signo DX grip after the Hyperjell grip.
+# Place the 0.5 cm Hyperjell grip section after the Signo DX grip.
+# Add tape, then attach the cap to the G3 body.
 ==References==