SEVEN Sweet Drop Mod

The SEVEN Sweet Drop Mod is a double-sided mod made by JEB spinner SEVEN. It is his personal version of the Sweet Drop Mod.

Construction

Parts needed

List from Ponkotu's blog:

• x1 Sweet Drop (Everything)
• x1 Pentel RSVP (grip)
• x2 Signo DX (Backplugs, tips and grips)

Additional Items

• Electrical tape

Text tutorial

1. Remove both Signo backplugs and fit one into the outer end of each Sweet Drop cap.
   

   

   
   
2. Fill the step between each backplug and cap with vinyl tape.
   

   

   
   
3. Cut RSVP grip sections just long enough to cover the taped joints and fit them over the joints. The source gives a fit-based length, not a fixed 1 cm cut.
   

   

   
   
4. Add decorative tape to the caps if desired.
5. Fit short Signo grip sections over the caps to hold the RSVP sections in place, as pictured.
   

   

   
   
6. Fit a Signo tip to each cap’s outer end and cover it with the remaining Signo grip. Add clear tape if the tip is loose.
   

   

   
   
7. Remove the Sweet Drop ink reservoir and only the writing nib on the coloured side; retain the opposite nib.
8. Optionally put tissue inside the barrel to adjust the balance, then attach the prepared caps.