My-Gi (Zigzag mod)

The My-Gi is a Double sided mod made by VoreTex. It's original name is a mix of "Giotto" and "My" (for spinning tastes). This mod was unnoficially renamed "Zigzag mod" as it became the "Mod of the meeting" of the FPSB official meeting 2018.

Construction

Parts needed

List from the pictures below:

• 2x Anyball (grip)
• 2x Giotto Turbo Maxi (caps)
• 2x Nitomn Stalogy (tips)
  • Only used in the heavy version.
• 2x Fibracolor Zig Zag (body)
  • The Zigzag pen has the same factory shape as Edding 661.
• 4x Unnamed sailor subs (grips)
  • The same is used in the IM* Hybrid
• 2x Beifa (grips)
• 2x O-ring (or grip)
• A body to connect both Zig zag.

Text tutorial

Preparation

1. Stretch 2 of the unnamed sailor subs until these can fit on a Giotto cap.
2. Cut 4x 3 sections of Beifa grip.
3. Cut the Giotto cap before the round part and file the interior.

Assembly

1. On the flat part, Put the Unnamed sailor sub until it's next to the part with the vertical pattern.
   

   

   
   
2. Turn the Anyball grip inside out and put it onto the sailor sub (a part should be on the giotto cap).
3. On the part with the pattern, add the grips in this order: 3 blocks of Beifa grip, one O-ring/grip and 3 blocks of Beifa grip.
4. Put one Sailor sub inside the Giotto cap.
   

   

   
   
5. (For the heavy version) Push a Stalogy tip in the grip inside the cap.
6. Put the giotto cap onto the Zig zag pen (Using the side that have been cut).
7. Repeat on the other side and connect.