Venus Gospel (Ennis Emboss)

The Venus Gospel is a double sided mod made by JEB spinner, Ennis. It is also commonly called: "Ennis Emboss".

Construction

Parts needed

List from Ennis's blog:

• x2 Tsukineko Fabrico / Tsukineko Emboss (barrel)
• x2 Grip G-Spec MP (Grip and metal tube)
• x1 Zebra Tect 2way (2 o-ring)
• x2 Marvy Art Director 1300/1400 (Backplugs)
• x2 Dong-A Anyball (Grips)
• x2 Pilot SuperGrip (Grips)
• x2 Zebra Airfit BA-9 (Lead sleeves)
• x1 Pentel Color Twin (barrel and big cap)

Additional Items

• Tape

Text tutorial

Preparation

1. Disasemble both Tsukineko Fabrico marker
2. Cut 1cm of the big cap of Pentel Color Twin, file the interior
3. Cut 4~5cm from your Pentel Color Twin barrel.
4. Dissasemble both Dr. Grip G-Spec MP and cut 2/3rd of the metal tubes (~3.33cm)
5. Cut 2.4cm of the Dr. Grip G-Spec MP grip from the front (the part with the inner lip), then separate the remaining grip in half (so you have one 2.4cm, and 2x 1.2cm of g-spec grip). the middle part won't be used
6. Cut your Pilot SuperGrip grips at 2 stripes from the flat part
7. Cut 2x2 stripes of Dong-A Anyball grips

Assembly

1. Put the 1cm of big Pentel Color Twin cap on the 4~5cm section of it.
2. Add some tape around the lead sleve of airfit and put it into the cutted G-Spec MP metal tube, it should fit snugly.
3. Put the metal tube inside the Marvy Art Director 1300/1400 backplugs.
4. Add the Marvy Art Director 1300/1400 backplugs inside the front side of Tsukineko Fabrico marker, add 2 stripes of Dong-A Anyball on top
5. On Tsukineko Fabrico, add the grips in this order: 1 o-ring of Zebra Tect-2-Way, the 1.2cm of G-Spec MP (from the back pf the grip) then Pilot SuperGrip grip (2 stripes first).
6. Overgrip the Pilot SuperGrip grip with the 2.4cm section of G-Spec MP grip.
7. Repeat on the other side then connect on the Pentel Color Twin 4~5cm body.

Video tutorial

Video tutorial by VoreTex.