VAIN Comssa

Vain Comssa is a personal Comssa mod made by JEB spinner VAIN.

Construction

Parts needed

List from VAIN's YouTube Channel:

• 2x HGG (two tips)
• 2x Comssa (2 caps and one barrel)
• 2x PenzGear Rings
• 6x Dong-A Anyball (4 black grips, 2 other colored grips, all to be cut to 2 sections)
• 2x Supergrip (grips)
• 1x Sarasa (grip)

Text tutorial

List from VAIN's YouTube Channel:

1. Screw HGG tips onto both of the Comssa caps.
2. Empty out Comssa barrel by removing the ink and backplug; return the backplug when it is removed.
3. Cut both of the Supergrip grips just at the end of the grooved section to just use the smooth section.
4. Cut the Sarasa grip to two sections, both at around 1.4-1.5cm.
5. Cut all the 6 anyballs into 2 sections.
6. Put the anyball sections on the Comssa cap with the order of black > colored anyball > black, 2 > 2 > 2.
7. Put the Supergrip grip on the Comssa cap, above the anyball sections.
8. Put a Penzgear ring inside the Supergrip grip.
9. Put the Sarasa grip over the Supergrip grip.
   

   

   
   
10. Repeat this process with the other Comssa cap.
11. Attach the Comssa caps on the Comssa barrel; done.

Video Tutorial

Video tutorial by Vora.