VAIN Comssa

Vain Comssa is a personal Comssa mod made by JEB spinner VAIN.

Construction

Parts needed

List from VAIN's YouTube Channel:

• 2x HGG (two tips)
• 2x Comssa (2 caps and one barrel)
• 2x PenzGear Rings
• 6x Dong-A Anyball (4 black grips, 2 other colored grips, all to be cut to 2 sections)
• 2x Supergrip (grips)
• 1x Sarasa (grip)

Text tutorial

List from VAIN's YouTube Channel:

1. Screw HGG tips onto both of the Comssa caps.
2. Empty out Comssa barrel by removing the ink and backplug; return the backplug when it is removed.
3. Cut both of the Supergrip grips just at the end of the grooved section to just use the smooth section.
4. Cut the Sarasa grip into two sections, each approximately 1.4–1.5 cm.
5. Prepare six Anyball blocks per cap. Colour combinations are decorative; the wiki uses three 2-block sections in black–coloured–black order.
6. Place the anyball sections on the Comssa cap with the order of black > colored anyball > black, 2 > 2 > 2.
7. Place the Supergrip grip on the Comssa cap, above the anyball sections.
8. Put a Penzgear ring inside the Supergrip grip.
9. Place the Sarasa grip over the Supergrip grip.
   

   

   
   
10. Repeat this process with the other Comssa cap.
11. Attach the Comssa caps on the Comssa barrel; done.

Video Tutorial

Video tutorial by Vora.