Akaitul

The Akaitul is a double-sided mod made by VNPS spinner Akai.

Construction

Parts needed

List from the video below:

• 2x TUL Mechanical Pencils (2 body 1 backplug)
• 2x Pilot G2 (Grips)
• 2x Sailor (Grips)
• 2x Metal ring big enough to fit onto the TUL body.
• 3/2x O-ring
  • Optional for the center part
• 2x Pentel RSVP (2 grip)
  • Optional

Text tutorial

The creator could not remember which pen supplied the two metal rings, and their dimensions are not specified. The rings must fit over the TUL barrel.

Preparation

1. Cut both Sailor grips to 9 rings.
2. Remove the metal part of the TUL backplug.
3. Cut the G2 grip so you have 2x a flat side with 5 rings.

Assembly

1. Add the G2 grip to the TUL barrel (leave around 7mm).
2. Place the metal ring, then one O-ring, on the TUL body.
3. Add the Sailor grip to the TUL body.
4. Add one RSVP grip into the end of the TUL barrel (fold it over itself height-wise)
5. Repeat on the other TUL and connect both using the backplug (you can add 1 O-ring).

Video tutorial

Video tutorial by Akai.