Aimo Ballsign KT

The Aimo Ballsign KT is a double-sided mod made by JEB spinner Aimo.

Construction

Parts needed

List from Aimo's blog

• 1x Sakura Ballsign (1 body)
• 2x Dr. Grip G-spec (grip)
• 2x Uni-Ball Signo (tips)
• 1x Pilot Opt Shaker (grip)
• 2x Pilot BPS-GP (tips)
• 2x Pentel Color Twin (big caps)

Additional Items

• An insert

Text tutorial

Preparation

1. Hollow both CT caps (keep the nub).
2. Cut both G-spec grips to 2.6 cm from the front.
3. Cut two 0.8 cm Opt grip sections from the back of the grips.

Assembly

1. Place the BPS tip inverted inside the CT cap.
2. Replace the CT cap nub in its original orientation, inside the inverted BPS-GP tip.
3. Place the Opt grip on the Signo tip.
4. Place the Signo tip inside the G-spec grip.
5. Place the G-spec grip on the CT cap.
6. Empty the Ballsign barrel and add an insert if desired. Repeat the cap assembly, then attach both caps without pushing them too far onto the barrel.