Menowa* AnpEn Mod
From Fen Spinner Wiki
More actions
The Menowa AnpEn Mod is a double-sided, power-oriented mod made by JEB spinner Menowa*.
Construction
Parts needed
List from the translation of Menowa's blog [1]:
- x2 Anpanman Markers (barrels)
- x1 Pilot AirBlanc (1 outer body)
- x2 Pilot Dr. Grip (2 grips)
- 1–2x Signo (two grip sections; two donors if matching different barrel colours)
- x2 Zebra Airfit BA-9 (2 tips)
- A suitable thick grip for the centre gap (optional if the connector is shortened)
Additional items
- Tape
- An insert (Optional)
Text tutorial[1]
- Disassemble two Anpanman markers, retaining their barrels. Do not cut the barrels.
- Remove the Airblanc outer tube and use it to join the two marker barrels at their rear openings.
- Cover any centre gap with a suitable thick grip. Alternatively shorten the Airblanc tube to reduce or remove the gap.
- Cut two approximately 1.2 cm Signo grip sections, near the fourth dimple from the end. Fit them to the recessed fronts of the marker barrels.
- Cut two approximately 2.5 cm Dr. Grip sections. The creator notes that the pieces may have been slightly longer.
- Fit a Dr. Grip section and Airfit tip at each end.
