Menowa* Prize Mod

The Menowa Prize Mod is a Double sided kt type mod made by UPSB modder Lost ANGELUS. This mod was made for Menowa* as his prize for winning Pen Spinning World Tournament 2015.

Construction

Parts needed

List from the video below:

• x1 Tulip Chisel Tip Marker (Body)
• x2 Pentel RSVP (Grips)
• x1 Sailor IC Liquid Gel (grip)
• x2 TUL Mechanical Pencil (Tips)
• x2 Pilot Dr. Grip (Grips)
• x2 Pentel Color Twin (Big caps)
• x2 O-ring

Additional Items

• Foil tape

Text tutorial

Preparation

1. Cut both Pilot Dr. Grip grips to 1.5cm (flat side).
2. Cut both Pentel RSVP grip to 0.4cm.
3. Cut 2x 2 section and 2x 3 section of Sailor IC Liquid Gel.
4. Hollow your Pentel Color Twin.
5. Cut the tip of the Tulip Chisel Tip Marker.

Assembly

1. Put the TUL Mechanical Pencil into the Pentel Color Twin cap.
2. Add one O-ring on the base of the TUL Mechanical Pencil tip / in the the Pentel Color Twin cap.
3. Put 2 section Sailor IC Liquid Gel grip then 1.5cm of Pilot Dr. Grip grip on the Pentel Color Twin cap.
4. Put 0.4cm of Pentel RSVP grip inside 3 blocks of Sailor IC Liquid Gel grip.
5. Put the last step inside the Pilot Dr. Grip grip.
6. Repeat then add both cap on the Tulip Chisel Tip Marker.
7. (Facultative) Add 4 0.6/7cm steips of foil tape beside the 2 blocks of Sailor IC Liquid Gel grip and beside the cap, on the Tulip Chisel Tip Marker.

Video tutorial

Video tutorial by Lost ANGELUS.