Menowa* Prize Mod

The Menowa Prize Mod is a Double sided kt type mod made by UPSB modder Lost ANGELUS. This mod was made for Menowa* as his prize for winning Pen Spinning World Tournament 2015.

Construction

Parts needed

List from the video below:

• x1 Tulip Chisel Tip Marker (Body)
• x2 Pentel RSVP (Grips)
• x1 Sailor IC Liquid Gel (grip)
• x2 TUL Mechanical Pencil (Tips)
• x2 Pilot Dr. Grip (Grips)
• x2 Pentel Color Twin (Big caps)
• x2 O-ring

Additional Items

• Foil tape

Text tutorial

Preparation

1. Cut both Dr. Grip grips to 1.5cm (flat side).
2. Cut both RSVP grip to 0.4cm.
3. Cut 2x 2 section and 2x 3 section of Sailor Gel.
4. Hollow your Color Twin.
5. Cut the tip of the Tulip Marker.

Assembly

1. Put the TUL Mechanical Pencil into the Color Twin cap.
2. Add one O-ring on the base of the TUL Mechanical Pencil tip / in the Color Twin cap.
3. Put 2 section of Sailor Gel grip then 1.5cm of Dr. Grip grip on the Color Twin cap.
4. Put 0.4cm of RSVP grip inside 3 blocks of Sailor Gel grip.
5. Put the last step inside the Dr. Grip grip.
6. Repeat then add both caps on the Tulip Marker.
7. (Facultative) Add 4 0.6/7cm strips of foil tape beside the 2 blocks of Sailor Gel grip and beside the cap, on the Tulip Marker.

Video tutorial

Video tutorial by Lost ANGELUS.