Grayman mod

The Grayman mod is a double sided made by JEB spinner, Grayman mod.

Construction

Parts needed

List from the translation of Grayman's post:

• x1 Polycarbonate pipe (1.3 cm outer diameter)
• x2 Nope Element (2 Tips)
• x2 Pilot Dr. Grip (2 grip) (ca, be subbed with 2x 4 block of Daiso Multi-Purpose pens)
• x2 Dong-A Anyball (grips)
• x2 Pilot SuperGrip (2 grip) (can be subbed by 2x 1.5 block of Daiso Multi-Purpose pens)
• x3/5 Daiso Multi-Purpose pens (grips)

Additional Items

• Tape
• An insert (Facultative)

Text tutorial

Preparation

1. Cut your polycarbonate tube to approximately 20cm.
2. Cut your Pilot Dr. Grip grips to 2cm (Grayman recommends using the part with the "lip")
3. Cut 4x 3 blocks of Dong-A Anyball grip.
4. Cut 2x 4 blocks of Pilot SuperGrip grip.
5. Cut one of your Daiso Multi-Purpose pens grip to 2x 2 block.
6. (if you don't use Pilot Dr. Grip grip) Cut your Daiso Multi-Purpose pens grip to 2x 4 block.
7. (if you don't use Pilot SuperGrip grip) Cut your Daiso Multi-Purpose pens grip to 2x 1.5 block.

Assembly

1. Put 3 block of Dong-A Anyball grip in the polycarbonate tube.
2. Add the base of the Nope Element tip inside the Dong-A Anyball grip.
3. Add the grips in this order: 3 block of Dong-A Anyball grip, 2 block of Daiso Multi-Purpose pens grips and a whole Daiso Multi-Purpose pens grip.
4. Then, overgrip with 4 blocks of Pilot SuperGrip grip (or 1.5 blocks of Daiso Multi-Purpose pens grip) then 2cm of (or 4 blocks Daiso Multi-Purpose pens grip).
5. (Facultative) Add an insert
6. Repeat on the other side