Grayman mod

The Grayman mod is a double sided made by JEB spinner, Grayman mod.

Construction

Parts needed

List from the translation of Grayman's post:

• x1 Polycarbonate pipe (1.3 cm outer diameter)
• x2 Nope Element (2 Tips)
• x2 Pilot Dr. Grip (2 grip) (can be subbed with 2x 4 block of Daiso Multi-Purpose pens)
• x2 Dong-A Anyball (grips)
• x2 Pilot SuperGrip (2 grip) (can be subbed by 2x 1.5 block of Daiso Multi-Purpose pens)
• x3/5 Daiso Multi-Purpose pens (grips)

Additional Items

• Tape
• An insert (Facultative)

Text tutorial

Preparation

1. Cut your polycarbonate tube to approximately 20cm.
2. Cut your Dr. Grip grips to 2cm (Grayman recommends using the part with the "lip")
3. Cut 4x 3 blocks of Anyball grip.
4. Cut 2x 4 blocks of SuperGrip grip.
5. Cut one of your Multi-Purpose pens grip to 2x 2 block.
6. (if you don't use Dr. Grip grip) Cut your Multi-Purpose pens grip to 2x 4 block.
7. (if you don't use SuperGrip grip) Cut your Multi-Purpose pens grip to 2x 1.5 block.

Assembly

1. Put 3 blocks of Anyball grip in the polycarbonate tube.
2. Add the base of the Nope Element tip inside the Anyball grip.
3. Add the grips in this order: 3 blocks of Anyball grip, 2 blocks of Multi-Purpose pens grips, and a whole Multi-Purpose pens grip.
4. Then, overgrip with 4 blocks of SuperGrip grip (or 1.5 blocks of Multi-Purpose pens grip) then 2cm of (or 4 blocks Multi-Purpose pens grip).
5. (Facultative) Add an insert
6. Repeat on the other side