Dark Mod Zero

The Dark Mod Zero is a personal mod made by spinner Orctupus Orctupus YouTube.

Construction

Parts needed

Source: Directly Published here by Orctupus

• 2x 9/32 - 5/16th Screw-in Target Point (Tip)
• 2x Pentel Energel Kuro (Body)
• 2x Pilot G2 (Grip)
• 2x TUL Ballpoint Retractable (Grip)
• 3x Dong-a Anyball (Grip)
• 1x Papermate Officemate (Barrel)

Additional Items

• Painters Tape | Paper Tape
• Utility Knife
• OPTIONAL: Pipe-Cutter
• Scissor End | Thin Metal Rod (To push the Energel Kuro Clicker housing out of the body)

Text tutorial

1. Disassemble the Pentel Energel Kuro pens by unscrewing the tips (Set aside), removing the metal ring, ink-tube, breaking the clip, and popping out the back of the retractable clicker mechanism through the lower square hole leaving only the bodies.

1. Measure and cut the Pentel Energel Kuro bodies 1cm from the back of the pen (clicker mechanism side) using a utility knife or pipe-cutter. Once both body's are cut, set aside.

1. Disassemble the Papermate Officemate removing the front plug and ink-tube leaving only the barrel.

1. Measure and cut the Papermate Officemate barrel 3.2cm from the front of the pen (Set aside).

1. Disassemble the TUL Ballpoint Retractable pens removing the front tip, metal ring, ink-tube, and set aside the Grips.

1. Disassemble the Pilot G2 pens removing only the grips and set aside

1. Cut 2x 8-Sections of Grip from two of the Dong-a Anyball grips. Set aside.

1. Cut 2x 4-Sections of Grip from one of the Dong-a Anyball grip. Set aside

1. Stretch the Pilot G2 Grips using a pliers.

1. Wrap 2x the 9/32 - 5/16th Screw-in Target Point tips with Painters Tape or Paper Tape around the base until they can be placed snug into the Pentel Energel Kuro front barrel (threaded side).

1. TO BE CONTINUED...

Assembly

!!! IN PROGRESS !!!

Video Tutorial

!!! COMING SOON !!!

References

]