VAIN's G3

VAIN's G3 designate each g3 mods made by JEB spinner VAIN.

Construction of VAIN G*2

Parts needed

List from Ponkotu's blog:

• 2x G3 (1 barrel, 2 grip and 1 plastic tip)
• 1x Zebra D1k (tip, grip and cap)
• 1x Pilot Frixion Colors (cap and rubber part)
• 1x Pilot G1 (tip)
• 3x Pentel Hybrid Gel Grip (3 tips and 1 backplug)
• 1x Dong-A Anyball (grip)
• 1x Uni-Ball Lakubo (grip)
• a stripe of any grip

Additional Items

• Tape
• An insert

Text tutorial

Preparation

1. Cut 2x 2 blocks of Anyball grip.
2. Prepare the G3 barrel by filing the square and front bump.
3. Cut the D1k grip to 7 blocks.

Assembly

Front side

1. Put the Rubber part of the Frixion cap inside the front of the G3 barrel.
2. Stack the tips in this order: plastic G3, Signo, and g1.
3. Put 2 Anyball grip on the g3 barrel, then add the Lakubo grip (flat side first).
4. Push the tip stack inside the Lakubo grip.

Cap side

1. Put a G3 grip into another one
2. stack the 3 HGG tip (wrap some tape around it) and put it inside the Frixion cap.
3. Push the small grip in the frixion cap.
4. Put both G3 grips inside the frixion cap.
5. Connect the G3 body to the Frixion cap.