台制戰彈 (pARu bullet mod TWPS ver.): Difference between revisions

Latest revision as of 17:30, 3 October 2026

The 台制戰彈 is a double-sided mod made by TWPS spinner Joey. The name can be roughly translated as "Taiwan-made Warheads".

Construction

Parts needed

List from Joey's post in the TWPS penmodding grop on Facebook:

x2 雄獅 NO.900水性美工筆 (body and cap)
x2 700N (caps)
x4 SKB G-2506 (grips)
x1 Sander A-110 (grip)
x2 Pilot BPS-GP (tips and grip)
x1 Sander B-1701 (body)
x1 Tempo三色筆 x 2 (grip)
x1 O.B office-ball Gel (grip)
x2 10x10 mm Neodymium magnet
x2 8x5 mm Neodymium magnet

Additional Items

Tape

Text tutorial

Preparation

Cut the front of the 雄獅 NO.900 pen.
Cut 0.8 cm of the 雄獅 NO.900 cap.
Cut 0.5 cm from the back of the body and the cap of the 700N.
Cut the B-1701 body to 4.5 cm.
Cut the O.B grip to 2x 0.4 cm from the back.
Cut the A-110 grip to 2.15 cm.
Cut 2x 11 blocks and 2x flat part of BPS-GP grip.
Demagnetize all four magnets.
Cut the black G-2506 grips to 1.6 cm from the front and the back (the cutting ratio is 3-8-1)
Cut the colored G-2506 grips to 1.7 cm.

Assembly

Wrap some tape around the 8.5 mm magnet.
Put in this order: the BPS-GP tip, the 10 mm magnet and the 8 mm magnet inside the 700N cap.
Place the weight package inside the 雄獅 NO.900 body.
Put 11 blocks of BPS-GP grip on the visible part of 700N cap.
On the 雄獅 NO.900 body, add in this order: Part of No.900 cap, BPS-GP flat grip and the whole Tempo grip (the grip should be over the grip on the 700NN cap).
Overgrip the flat BPS-GP and the Tempo grip with The G-2506 black grip, the G-2506 colored grip and another G-2506 black grip.
Repeat on the other side.
Place the A-110 grip on the B-1701 body and connect.

References

@@ Line 32: / Line 32: @@
 ====Preparation====
 # Cut the front of the 雄獅 NO.900 pen.
-# Cut 0.8cm of the 雄獅 NO.900 cap.
+# Cut 0.8 cm of the 雄獅 NO.900 cap.
-# Cut 0.5cm from the back of the body and the cap of the 700N.
+# Cut 0.5 cm from the back of the body and the cap of the 700N.
-# Cut the B-1701 body to 4.5cm.<br>[[File:台制戰彈cut.jpg|left|thumb|300px]]<br clear=all>
+# Cut the B-1701 body to 4.5 cm.<br>[[File:台制戰彈cut.jpg|left|thumb|300px]]<br clear=all>
-# Cut the O.B grip to 2x 0.4cm from the back.
+# Cut the O.B grip to 2x 0.4 cm from the back.
-# Cut the A-110 grip to 2.15cm.<br>[[File:台制戰彈center.jpg|left|thumb|300px]]<br clear=all>
+# Cut the A-110 grip to 2.15 cm.<br>[[File:台制戰彈center.jpg|left|thumb|300px]]<br clear=all>
 # Cut 2x 11 blocks and 2x flat part of BPS-GP grip.
 # Demagnetize all four magnets.
-# Cut the black G-2506 grips to 1.6cm from the front and the back (the cutting ratio is 3-8-1)
+# Cut the black G-2506 grips to 1.6 cm from the front and the back (the cutting ratio is 3-8-1)
-# Cut the colored G-2506 grips to 1.7cm.
+# Cut the colored G-2506 grips to 1.7 cm.
 ====Assembly====
-# Wrap some tape around the 8.5mm magnet.
+# Wrap some tape around the 8.5 mm magnet.
-# Put in this order: the BPS-GP tip, the 10mm magnet and the 8mm magnet inside the 700N cap.<br>[[File:台制戰彈weight.jpg|left|thumb|300px]]<br clear=all>
+# Put in this order: the BPS-GP tip, the 10 mm magnet and the 8 mm magnet inside the 700N cap.<br>[[File:台制戰彈weight.jpg|left|thumb|300px]]<br clear=all>
-# Put the weight package inside the 雄獅 NO.900 body.
+# Place the weight package inside the 雄獅 NO.900 body.
 # Put 11 blocks of BPS-GP grip on the visible part of 700N cap.<br>[[File:台制戰彈cap.jpg|left|thumb|300px]]<br clear=all>
 # On the 雄獅 NO.900 body, add in this order: Part of No.900 cap, BPS-GP flat grip and the whole Tempo grip (the grip should be over the grip on the 700NN cap).
 # Overgrip the flat BPS-GP and the Tempo grip with The G-2506 black grip, the G-2506 colored grip and another G-2506 black grip.<br>[[File:台制戰彈gripp.jpg|left|thumb|300px]]<br clear=all>
 # Repeat on the other side.
-# Put the A-110 grip on the B-1701 body and connect.
+# Place the A-110 grip on the B-1701 body and connect.
 ==References==
+<references />
 [[Category:Pen Mods]]