Cafca G3

The Cafca G3 is a personal mod made by JEB spinner Cafca.

Construction

Parts needed

List from the ponkotu's blog:

• 2x G3 (barrel, grip, backplug, and two plastic tip)
• 1x Signo DX (tip and grip)
• 1x Pilot Supergrip (grip)
• 1x Pilot Frixion Colors (cap; source of the small rubber part)
• 1x Zebra Hyper Jell (grip and cap)
• 1x Pentel Hybrid Gel Grip (Tip)

Additional Items

• Tape
• An insert

Text tutorial

Preparation

1. Cut the clip of the HyperJell cap.
2. Prepare the G3 barrel by filing the square and front bump.
3. Sand the plastic nub inside the G3 plastic tip.
4. Cut ~7mm of Signo DX grip.
5. Cut the small round part of the Frixion color rubber part.

Assembly

Front side

1. Stack the tips in this order: G3 tip, hollowed g3 tip and signo tip.
2. Put the grips on the G3 front in this order: ~7mm of Signo dx grip and whole supergrip grip (flat side first).

Cap side

1. Put the Frixion rubber part inside the HGG tip.
2. Put the HGG tip inside the round side of the Hyperjell grip.
3. Push the Hyperjell grip in it's cap (round side first).
4. Add tape on the G3 body then connect it to the Hyper Jell cap.