Nanafushi BT: Difference between revisions
From Fen Spinner Wiki
More actions
m →Text tutorial: Removed excessive redirect |
No edit summary |
||
| Line 15: | Line 15: | ||
List from Nanafushi's blog<ref name="Tutorial">https://note.com/nanafushi674/n/nd66b840444e2</ref>: | List from Nanafushi's blog<ref name="Tutorial">https://note.com/nanafushi674/n/nd66b840444e2</ref>: | ||
* x2 [[Nitoms Stalogy|Nitoms Stalogy Ballpoint]] (Barrels, tips) | * x2 [[Nitoms Stalogy|Nitoms Stalogy Ballpoint]] (Barrels, tips) | ||
* x2 [[Pilot Dr.Grip]] (Metal rings) | * x2 [[Pilot Dr. Grip]] (Metal rings) | ||
* x2 [[Zebra Tect2way]] O-ring | * x2 [[Zebra Tect2way]] O-ring | ||
* x1 [[Pilot AirBlanc]] (grip) | * x1 [[Pilot AirBlanc]] (grip) | ||
Revision as of 21:15, 10 March 2025
The Nanafushi BT is a personnal double sided mod of JEB spinner, Nanafushi.
Construction
Parts needed
List from Nanafushi's blog[1]:
- x2 Nitoms Stalogy Ballpoint (Barrels, tips)
- x2 Pilot Dr. Grip (Metal rings)
- x2 Zebra Tect2way O-ring
- x1 Pilot AirBlanc (grip)
- x2 Pilot Opt Shaker (either this or ballpoint work) (grips)
- x1 Pencil
- x2 decorative grip
Text tutorial
Preparation
- Cut 2x 0.5cm section of AirBlanc grip.
- Cut the Stalogy barrels to 9.2 cm from the back of the barrel, then cut a 1.1cm section from the leftover barrel
- Cut 5cm of the pencil.
Assembly
- Assemble the tip stack this way: Dr.Grip metal ring over the thread of the Stalogy tip then cover it with the 0.5cm section of AirBlanc grip.
- Put the tip package inside the Stalogy barrels (AirBlanc grip facing outward), cover it with Opt Shaker grip (Dimple side facing the center of the mod).
- Put the decorative grip next to the Opt Shaker grip.
- Repeat on the other side
- Put the small part of Stalogy barrel on the center of the pencil, add the Zebra Tect2way o-rings on both side
- Connect both body on the pencil
