Nanafushi BT

The Nanafushi BT is a personnal double sided mod of JEB spinner, Nanafushi.

Construction

Parts needed

List from Nanafushi's blog:

• x2 Nitoms Stalogy Ballpoint (Barrels, tips)
• x2 Pilot Dr. Grip (Metal rings)
• x2 Zebra Tect 2way O-ring
• x1 Pilot AirBlanc (grip)
• x2 Pilot Opt Shaker (either this or ballpoint work) (grips)
• x1 Pencil
• x2 decorative grip

Text tutorial

Preparation

1. Cut 2x 0.5cm section of AirBlanc grip.
2. Cut the Stalogy barrels to 9.2 cm from the back of the barrel, then cut a 1.1cm section from the leftover barrel
3. Cut 5cm of the pencil.

Assembly

1. Assemble the tip stack this way: Dr.Grip metal ring over the thread of the Stalogy tip then cover it with the 0.5cm section of AirBlanc grip.
   

   

   
   
2. Put the tip package inside the Stalogy barrels (AirBlanc grip facing outward), cover it with Opt Shaker grip (Dimple side facing the center of the mod).
3. Put the decorative grip next to the Opt Shaker grip.
4. Repeat on the other side
5. Put the small part of Stalogy barrel on the center of the pencil, add the Zebra Tect2way o-rings on both side
6. Connect both body on the pencil