KUzu G3 (UPSB ver.)

The kUzu G3 is a personal mod of JEB spinner kUzu.

Construction

Parts needed

List from UPSB V3:

• 1x Plastic G3 (Barrel, tip)
• 1x Zebra Hyper Jell (Grip and cap)
• 1x HGG (tip)
• 2x Signo DX (2 tips, 1 grip)
• 2x Pilot Hi-Tec-C (Tips)
• 1x Dong-A Anyball (Grip)
• 1x Uni-ball Knock (Grip)
• 1x 1 cm grip (Zebra Hyper Jell can be used)

Additional Items

• Electric (black) tape
• an insert (optional) (kUzu uses a page from the "Weekly Jump" magazine)
  

  

  Highligh of the part used for the original insert

  
  

Text tutorial

Preparation

1. Remove the backplug, grip and ink from the Plastic G3, then sand down the nubs on the front.
2. Cut 1 cm of a grip (Hyper Jell is recommended).
3. Cut 1 cm of Hyper Jell grip.
4. Do a gripcut on the Knock grip.
5. Cut 3 sections from the Anyball grip.
6. Cut the clip from the Hyper Jell cap.
7. Remove one grip and 2 tips from the Signo DX.
8. Remove the tips from the HGG and Pilot Hi-Tec-C.

Assembly

1. Add 1 cm of Hyper Jell grip on the front of the Plastic G3.
2. Add 1 cm of the other grip next to the Hyper Jell grip.
3. Put the Pilot Hi-Tec-C tip on the Plastic G3, then add a Signo DX tip onto the Pilot Hi-Tec-C tip (add tape / Blu Tack to help the tips stay in place).
4. Cover the 3 tips with the Signo DX grip.
5. Put the Knock grip on the Signo DX grip.
6. Add the 3 sections of Anyball grip in front of the Knock grip.
7. Put one Signo DX tip inside the Hyper Jell cap.
8. Put the HGG tip on the remaining Pilot Hi-Tec-C tip, then put it inside the rest of the Hyper Jell grip.
9. Put the Hyper Jell grip inside the Hyper Jell cap (HGG tip first).
10. Wrap tape on the back of the Plastic G3 body.
11. Add an insert (optional).
12. Assemble the cap on the back of the Plastic G3 body.

Trivia

• This version of the mod is not accurate to the one used by kUzu, as the tutorial of his own version remains secret to this day. However, the list of the parts is available: