RSVP MMx / RSVP MMT: Difference between revisions

Revision as of 21:54, 11 December 2024

The RSVP MMx / RSVP MMT is a Single Sided mod created by Kam. This mod is a variation of the RSVP MX mod using Pilot G2 body for it's front structure.

The original name of the mod is "Momentum MX" (RSVP MMx), but due to a naming error by koreans, it also has "RSVP Mx MomenTum" (RSVP MMT) as another name.

Construction

Parts needed

List from Penspinning.fr's post:^[1]

1x RSVP (Everything)
1x HGG (tip)
1x Pilot G2 (Body)

Additional Items

Blu-tak/ teflon tape
An insert (Facultative)

Text Tutorial

Unscrew the tip from HGG pen.
Remove RSVP pen's cap and break off clip.
(Facultative) Add an insert inside the RSVP body.
Poke a hole in the RSVP backplug and insert the inktube into the pen backwards.
Remove RSVP pen's grip and insert it in the cap.
Place the RSVP cap behind the pen.
Disasemble the G2 body and cut 3.9cm from the "screw" part.
File the bump on the front of the RSVP until G2 body fit
Screw on/add blu-tak/teflon tape/to the RSVP's front tip area. Add the Hybrid Gel Grip|HGG tip onto it.
Assemble the G2 body on the front of the RSVP

References

↑ https://www.penspinning.fr/rsvp-mmx-mmt-914

[Penspinning.fr-1] ttps://www.penspinning.fr/rsvp-mmx-mmt-914

[1]

@@ Line 24: / Line 24: @@
 ===Text Tutorial===
 # Unscrew the tip from HGG pen.
-# Remove [[Pentel RSVP|RSVP]] pen's cap and break off clip.
+# Remove RSVP pen's cap and break off clip.
-# (Facultative) Add an insert inside the [[Pentel RSVP|RSVP]] body.
+# (Facultative) Add an insert inside the RSVP body.
-# Poke a hole in the [[Pentel RSVP|RSVP]] backplug and insert the inktube into the pen backwards.
+# Poke a hole in the RSVP backplug and insert the inktube into the pen backwards.
-# Remove [[Pentel RSVP|RSVP]] pen's grip and insert it in the cap.
+# Remove RSVP pen's grip and insert it in the cap.
-# Place the [[Pentel RSVP|RSVP]] cap behind the pen.
+# Place the RSVP cap behind the pen.
-# Disasemble the [[Pilot G2]] body and cut 3.9cm from the "screw" part.
+# Disasemble the G2 body and cut 3.9cm from the "screw" part.
-# File the bump on the front of the [[Pentel RSVP|RSVP]] until [[Pilot G2]] body fit
+# File the bump on the front of the RSVP until G2 body fit
-# Screw on/add blu-tak/teflon tape/to the [[Pentel RSVP|RSVP]]'s front tip area. Add the [[Hybrid Gel Grip|HGG]] tip onto it.
+# Screw on/add blu-tak/teflon tape/to the RSVP's front tip area. Add the Hybrid Gel Grip|HGG tip onto it.
-# Assemble the [[Pilot G2]] body on the front of the [[Pentel RSVP|RSVP]]
+# Assemble the G2 body on the front of the RSVP
 ==References==