Nanafushi BT: Difference between revisions
From Fen Spinner Wiki
More actions
Created page with "{{Mod Infobox |name= |image={{#setmainimage:Nanafushi bt.jpg}} |creator= Nanafushi |style= Double Sided |length= 21.7cm |weight= 20g |cog= cop }} The ''' Nanafushi BT''' is a personnal double sided mod of JEB spinner, Nanafushi. ==Construction== ===Parts needed=== List from Nanafushi's blog<ref name="Tutorial">https://note.com/nanafushi674/n/nd66b840444e2</ref>: * x2 Nitoms Stalogy Ballpoint (Barrels, tips) * x2 Pilot Dr.Grip (Metal ri..." |
|||
| Line 23: | Line 23: | ||
===Text tutorial=== | ===Text tutorial=== | ||
==== | ====Preparation==== | ||
# Cut 2x 0.5cm section of [[Pilot AirBlanc]] grip. | # Cut 2x 0.5cm section of [[Pilot AirBlanc]] grip. | ||
# Cut the [[Nitoms Stalogy]] barrels to 9.2 cm from the back of the barrel, then cut a 1.1cm section from the leftover barrel | # Cut the [[Nitoms Stalogy]] barrels to 9.2 cm from the back of the barrel, then cut a 1.1cm section from the leftover barrel | ||
Revision as of 09:53, 22 November 2024
The Nanafushi BT is a personnal double sided mod of JEB spinner, Nanafushi.
Construction
Parts needed
List from Nanafushi's blog[1]:
- x2 Nitoms Stalogy Ballpoint (Barrels, tips)
- x2 Pilot Dr.Grip (Metal rings)
- x2 Zebra Tect2way O-ring
- x1 Pilot AirBlanc (grip)
- x2 Pilot Opt Shaker (either this or ballpoint work) (grips)
- x1 Pencil
- x2 decorative grip
Text tutorial
Preparation
- Cut 2x 0.5cm section of Pilot AirBlanc grip.
- Cut the Nitoms Stalogy barrels to 9.2 cm from the back of the barrel, then cut a 1.1cm section from the leftover barrel
- Cut 5cm of the pencil.
Assembly
- Assemble the tip stack this way: Pilot Dr.Grip metal ring over the thread of the Nitoms Stalogy tip then cover it with the 0.5cm section of Pilot AirBlanc grip.
- Put the tip package inside the Nitoms Stalogy barrels (Pilot AirBlanc grip facing outward), cover it with Pilot Opt Shaker grip (Dimple side facing the center of the mod).
- Put the decorative grip next to the Pilot Opt Shaker grip.
- Repeat on the other side
- Put the small part of Nitoms Stalogy barrel on the center of the pencil, add the Zebra Tect2way o-rings on both side
- Connect both body on the pencil
