Ian Jenson mod: Difference between revisions

← Older edit

Latest revision as of 18:55, 1 October 2026

The Ian Jenson mod is a double-sided mod made by Ian Jenson.

Construction

Parts needed

Parts list from the video below:

2x Zebra Airfit BA-9 (tips)
2x Pentel Color Twin (2 big caps, 2 barrels, 1 back plug)
1x Sailor IC Liquid Gel (grip)
1x Pilot Dr. Grip (grip)

Text tutorial

Preparation

Empty both Color Twin or Art Color barrels and keep one backplug.
Cut a 7.4 cm section from each barrel, excluding the narrow tip section from the measurement.
Cut both large caps to 3.7 cm.
Cut the Dr. Grip grip in half. Cut two three-ring Sailor grip sections.

Assembly

Join the barrel sections with the retained backplug. Add tape if needed for a secure joint.
Fit a cut cap onto each outer end of the joined barrels.
Fit a three-ring Sailor section onto one cap, followed by half of the Dr. Grip grip. Insert an Airfit tip into the exposed end of the Dr. Grip section.
Repeat the end assembly on the other cap.

Video tutorial

Video tutorial by Oleg.

References

@@ Line 22: / Line 22: @@
 ===Text tutorial===
 ====Preparation====
-# Cut 7.4 cm from both Color Twin barrels. Do not include the tip.
+# Empty both Color Twin or Art Color barrels and keep one backplug.
-# Cut both of the big Color Twin caps to 3.7cm.
+# Cut a 7.4 cm section from each barrel, excluding the narrow tip section from the measurement.<br>[[File:IanJensonModBarrelCuts.jpg|left|thumb|200px]]<br clear=all>
-# Cut half of a Dr. Grip grip.
+# Cut both large caps to 3.7 cm.<br>[[File:IanJensonModCapCuts.jpg|left|thumb|200px]]<br clear=all>
-# Cut two 3-block pieces of Sailor Gel grip.
+# Cut the Dr. Grip grip in half. Cut two three-ring Sailor grip sections.<br>[[File:IanJensonModSailorGrip.jpg|left|thumb|200px]]<br clear=all>
 ====Assembly====
-# Connect both Color Twin barrels using a back plug. (tape might be necessary)
+# Join the barrel sections with the retained backplug. Add tape if needed for a secure joint.<br>[[File:IanJensonModBarrelJoint.jpg|left|thumb|200px]]<br clear=all>
-# Put both Color Twin big caps on the mod base.
+# Fit a cut cap onto each outer end of the joined barrels.
-# Add three blocks of Sailor Gel grip, then half of a Dr. Grip grip.
+# Fit a three-ring Sailor section onto one cap, followed by half of the Dr. Grip grip. Insert an Airfit tip into the exposed end of the Dr. Grip section.<br>[[File:IanJensonModTipAssembly.jpg|left|thumb|200px]]<br clear=all>
-# Put the Zebra Airfit tip inside the Dr. Grip grip.
+# Repeat the end assembly on the other cap.
-# Repeat on the other side.
 ===Video tutorial===