Fukrou's G3

Fukrou's G3 is a serie of personal mod made by JEB spinner Fukrou.

Construction for Fukrou G3 V1

List of V1 and V2 from Fukrou's blog:

Parts needed

• 1x Plastic G3 (barrel and tip)
• 2x Hi-Tec-C (tip)
• 1x HGG (grip)
• 1x Hyperjell (cap)
• 1x |Signo DX (tip and grip)
• 1x |Signo Broad (grip)
• 1x Supergrip MP (grip)

Text tutorial

Preparation

1. Cut the clip of the Hyperjell cap.
2. Prepare the G3 barrel by filing the square bump.
3. Cut the Signo DX grip at the 3rd dimple.
4. Cut 2.5cm from the Signo broad grip.
5. Cut one ring of Supergrip grip.

Assembly

Front side

1. Add G3 tip > Signo > Hi-Tec-C on the front for the tip stack.
2. Cover the G3 front with the cut Signo Dx grip and a whole HGG grip (ring side first).

Cap side

1. Put 1 stripe of Supergrip grip on the Hitec tip, put it inside the Hyperjell cap followed by the cut signo grip.
2. Add an insert into the G3. Tape the back of the G3 and attach the cap to it.

Construction for Fukrou G3 V2

Parts needed

• 2x Plastic G3 (barrel, grip and 2 tips)
• 1x Zebra Hyper Jell (grip)
• 1x Uni-Ball Air (cap)
• 2x Signo (2 tips)
• 1x Pilot SuperGrip (grip)

Text tutorial

Preparation

1. Cut the clip of the Air cap.
2. Prepare the G3 barrel by filing the square bump.
3. Cut 2.5cm from the Signo broad grip.
4. Cut 3 blocks and 5 blocks of Supergrip grip.

Assembly

Front side

1. Add G3 tip > G3 tip > Signo on the front for the tip stack.
2. Cover the G3 front with the 5 sections of Supergrip grip and a whole Hyperjell grip.

Front side

1. Put a Signo tip, a G3 grip (stripe side first), and 3 blocks of Supergrip grip inside the Air cap.
2. Add an insert into the G3. Tape the back of the G3 and attach the cap to it.