G3 MX: Difference between revisions

Latest revision as of 13:58, 27 August 2026

The G3 MX is a single sided mod made by an unknown spinner.

Construction

Parts needed

List adapted from Penmodding.pm:^[1]

1x G3 (all parts except the ink tube)
1x HGG (grip)
1x SGM (grip)
1x Pentel RSVP (ink tube)
1x Dong-A Anyball (grip)

Additional Items

Tape or cotton
An insert

Text tutorial

Cut or file the clip from the G3 cap.
Remove the G3 tip and ink tube.
Poke a hole in the G3 backplug.
Fill the G3 ink tube with tape or cotton to prevent ink leakage.
Reinsert the G3 ink tube backwards, then place the G3 tip on the front of the G3 body.
Put the HGG grip inside the G3 cap.
Cut the Anyball grip into four sections. Place one quarter over the G3 grip and one quarter over the G3 cap.
Add tape to the back of the G3 body, then attach the G3 cap.

References

↑ G3 MX tutorial

[1] G3 MX tutorial

[1]

@@ Line 13: / Line 13: @@
 ===Parts needed===
-List from the FPSB V2<ref name="Tutorial">https://thefpsbv2.penspinning.fr//viewtopic.php?t=528</ref>:
-* 1x [[Pilot G3|G3]] (barrel, grip, backplug, and metal tip)
+List adapted from Penmodding.pm:<ref>[https://penmodding.pm/archives/431 G3 MX tutorial]</ref>
-* 1x [[Pentel Hybrid Gel Grip]] (grip)
+* 1x [[Pilot G3|G3]] (all parts except the ink tube)
+* 1x [[Pentel Hybrid Gel Grip|HGG]] (grip)
+* 1x SGM (grip)
+* 1x [[Pentel RSVP]] (ink tube)
 * 1x [[Dong-A Anyball]] (grip)
-* 1x [[Pentel RSVP]] (inktube)
-** The RSVP inktube is optionnal.
 ====Additional Items====
-* Tape
+* Tape or cotton
 * An insert
 ===Text tutorial===
-====Preparation====
+# Cut or file the clip from the G3 cap.
-# Cut the clip of the G3 cap.
+# Remove the G3 tip and ink tube.
-# Cut 2x 3 blocks of Anyball grip.
+# Poke a hole in the G3 backplug.
-# Cut the Signo DX grip at the end of the 4th dimpple.
+# Fill the G3 ink tube with tape or cotton to prevent ink leakage.
-# Poke a Hole in the G3 backplug.
+# Reinsert the G3 ink tube backwards, then place the G3 tip on the front of the G3 body.
+# Put the HGG grip inside the G3 cap.
-====Assembly====
+# Cut the Anyball grip into four sections. Place one quarter over the G3 grip and one quarter over the G3 cap.
-=====Front side=====
+# Add tape to the back of the G3 body, then attach the G3 cap.
-# Add 3 blocks of Anyball grip on the base of the G3 tip.
-=====Back side=====
-# Put an RSVP intube inside the Poked G3 backplug.
-# Push the HGG grip inside the G3 cap.
-# Add 3 blocks of Anyball grip on the G3 cap.
-# Add tape on the G3 body then connect it to the G3.
 ==References==