Reeder Mod: Difference between revisions
From Fen Spinner Wiki
More actions
Created page with "{{Mod Infobox |name= |image={{#setmainimage:ReederMod.png}} |creator= Tek |style= Single Sided |length= ~19cm |weight= ? |cog= }} The '''Reeder Mod''' is a personal mod made by Tek. ==Construction== ===Parts needed=== List from UPSB V3<ref name="Tutorial">https://web.archive.org/web/20090205154902/http://www.upsb.info/forum/index.php?showtopic=15795</ref>: * 2x G3 (Metal tip, barrel, backplug and 2 caps) * 1x Pentel RSVP (Inktube and grip) * 1x Z..." |
No edit summary |
||
| Line 14: | Line 14: | ||
===Parts needed=== | ===Parts needed=== | ||
List from UPSB V3<ref name="Tutorial">https://web.archive.org/web/20090205154902/http://www.upsb.info/forum/index.php?showtopic=15795</ref>: | List from UPSB V3<ref name="Tutorial">https://web.archive.org/web/20090205154902/http://www.upsb.info/forum/index.php?showtopic=15795</ref>: | ||
* 2x [[Pilot G3|G3]] ( | * 2x [[Pilot G3|G3]] (metal tip, barrel, back plug, and 2 caps) | ||
* 1x [[Pentel RSVP]] ( | * 1x [[Pentel RSVP]] (ink tube and grip) | ||
* 1x [[ZebraTelescopic]] (tip) | * 1x [[ZebraTelescopic]] (tip) | ||
* 1x [[Dong-A Anyball]] (grip) | * 1x [[Dong-A Anyball]] (grip) | ||
| Line 21: | Line 21: | ||
* 1x Bic RT (tip) | * 1x Bic RT (tip) | ||
====Additional | ====Additional items=== | ||
* Tape | * Tape | ||
* An insert | * An insert | ||
| Line 31: | Line 31: | ||
# Cut the clip of the G3 cap. | # Cut the clip of the G3 cap. | ||
# [[G3 Barrel Preparation|Prepare the G3 barrel]] by filing the square bump. | # [[G3 Barrel Preparation|Prepare the G3 barrel]] by filing the square bump. | ||
# Cut | # Cut 5 mm of RSVP grip. | ||
# Cut 4 sections of G3 grip. | # Cut 4 sections of G3 grip. | ||
# Cut 3. | # Cut 3.5 cm of G2 body. | ||
# Cut | # Cut three 2-block pieces of Anyball grip. | ||
# Cut the other G3 cap to | # Cut the other G3 cap to 4 cm. | ||
====Assembly==== | ====Assembly==== | ||
Revision as of 11:22, 28 August 2026
The Reeder Mod is a personal mod made by Tek.
Construction
Parts needed
List from UPSB V3[1]:
- 2x G3 (metal tip, barrel, back plug, and 2 caps)
- 1x Pentel RSVP (ink tube and grip)
- 1x ZebraTelescopic (tip)
- 1x Dong-A Anyball (grip)
- 1x Pilot G2 (body)
- 1x Bic RT (tip)
=Additional items
- Tape
- An insert
Text tutorial
Preparation
- Cut the clip of the G3 cap.
- Prepare the G3 barrel by filing the square bump.
- Cut 5 mm of RSVP grip.
- Cut 4 sections of G3 grip.
- Cut 3.5 cm of G2 body.
- Cut three 2-block pieces of Anyball grip.
- Cut the other G3 cap to 4 cm.
Assembly
Front side
- Wrap some tape around the base of the G3 tip.
- Put the G3 tip on the end of the cut G3 cap.
- Add 2 blocks of Anyball grip on the base of the G3 tip.
- Wrap some tape around the base of the Bic RT tip.
- Wrap an insert around the base of the RT tip and put it inside the G2 body.
- Add 2 blocks of Anyball around the G2 body (opposite the tip).
- Wrap about 10.5 cm of electric tape at 4cm (down side) and wrap less tape at around the top of the RSVP inktube.
- Put the RSVP inktube in the Bic rt tip.
- Put the Part with the G2 body over the front of the G3 body.
- Put the G3 cut cap part over the G2 body (G3 tip should "stack" over the bic tip).
Cap side
- Put the small RSVP grip section and put it on the Telescopic tip.
- Wrap an insert around the G3 grip and put it into the G3 cap.
- Add tape on the G3 body then connect it to the G3 cap.
- Add white tape and 2 Anyball stripes on the cap.