Tilt Whiteboard Marker Mod: Difference between revisions

← Older edit

Latest revision as of 22:38, 3 October 2026

The Tilt Whiteboard Marker Mod is a double-sided technical-linkage-oriented mod made by Tilt.

Construction

Parts needed

List from video below:

x2 Daiso Whiteboard marker (2 body)
x2 Pilot Opt Ballpoint Pen (Tips and outer body)
x1 Pilot SuperGrip (Grips)
x2 Amazon basic cushion grip pens (2 grips)
x1 pen+gear mechanical pencil (barrel) (Body)

Additional Items

Tape

Text tutorial

Empty both Daiso whiteboard markers and remove their front assemblies. Wrap tape around the exposed front ends to fit the Opt barrel sleeves.
Remove the Opt ballpoint tips and outer barrel sleeves, the two Amazon Basics cushion grips, and the Pen+Gear mechanical-pencil connector barrel.
Cut two 2-stripe SuperGrip sections.
Stretch each cushion grip and fit it over the round-hole end of an Opt sleeve.
Fit a SuperGrip section around each Opt tip, then push that tip into the cushion-grip end of its sleeve.
Fit each completed sleeve onto a taped marker front.
Wrap tape around the connector barrel as needed and join the two marker barrels at their rear openings.

Video tutorial

Video tutorial by Tilt.

References

@@ Line 8: / Line 8: @@
 |cog= cop
 }}
-The '''Tilt Whiteboard Marker Mod''' is a double sided tech linkage oriented mod made by [[Tilt]].
+The '''Tilt Whiteboard Marker Mod''' is a double-sided technical-linkage-oriented mod made by [[Tilt]].
 ==Construction==
@@ Line 24: / Line 24: @@
 ===Text tutorial===
-====Preparation====
+# Empty both Daiso whiteboard markers and remove their front assemblies. Wrap tape around the exposed front ends to fit the Opt barrel sleeves.
-# Cut 2x 2 stripe of [[Pilot SuperGrip]] grip.
+# Remove the Opt ballpoint tips and outer barrel sleeves, the two Amazon Basics cushion grips, and the Pen+Gear mechanical-pencil connector barrel.
+# Cut two 2-stripe SuperGrip sections.
+# Stretch each cushion grip and fit it over the round-hole end of an Opt sleeve.
+# Fit a SuperGrip section around each Opt tip, then push that tip into the cushion-grip end of its sleeve.
+# Fit each completed sleeve onto a taped marker front.
+# Wrap tape around the connector barrel as needed and join the two marker barrels at their rear openings.
-====Assembly====
-# Put tape on the front of the [[Daiso Whiteboard marker]].
-# Stretch then put the Amazon basic cushion grip pens on the [[Pilot Opt Ballpoint Pen]] outer body (Round hole side).
-# Add 2 stripe of [[Pilot SuperGrip]] grip on the [[Pilot Opt Ballpoint Pen]] tip.
-# Push the [[Pilot Opt Ballpoint Pen]] tips in the [[Pilot Opt Ballpoint Pen]] outer body (side with amazon cushion grip).
-# Assemble the [[Pilot Opt Ballpoint Pen]] outer body on the front of the [[Daiso Whiteboard marker]].
-# Repeat on the other side.
-# Add tape on the pen+gear mechanical pencil and connect the [[Daiso Whiteboard marker]] onto it.
 ===Video tutorial===
 <youtube>https://www.youtube.com/watch?v=-y8NVvxa154</youtube>
@@ Line 43: / Line 40: @@
 ==References==
+<references />
 [[Category:Pen Mods]]