G3 MX: Difference between revisions
From Fen Spinner Wiki
More actions
Created page with "{{Mod Infobox |name= |image={{#setmainimage:g3mx.jpg}} |creator= ? |style= Single Sided |length= 17.8cm |weight= ?g |cog= }} The '''G3 MX''' is a single sided mod made by an unknown spinner. ==Construction== ===Parts needed=== List from the FPSB V2<ref name="Tutorial">https://thefpsbv2.penspinning.fr//viewtopic.php?t=528</ref>: * 1x G3 (barrel, grip, backplug, and metal tip) * 1x Pentel Hybrid Gel Grip (grip) * 1x Dong-A Anyball (grip) * 1x P..." |
Resolve source review; correct construction and cite tutorial heading |
||
| (One intermediate revision by the same user not shown) | |||
| Line 13: | Line 13: | ||
===Parts needed=== | ===Parts needed=== | ||
List from | |||
* 1x [[Pilot G3|G3]] ( | List adapted from Penmodding.pm:<ref>[https://penmodding.pm/archives/431 G3 MX tutorial]</ref> | ||
* 1x [[Pentel Hybrid Gel Grip]] (grip) | * 1x [[Pilot G3|G3]] (all parts except the ink tube) | ||
* 1x [[Pentel Hybrid Gel Grip|HGG]] (grip) | |||
* 1x SGM (grip) | |||
* 1x [[Pentel RSVP]] (ink tube) | |||
* 1x [[Dong-A Anyball]] (grip) | * 1x [[Dong-A Anyball]] (grip) | ||
====Additional Items==== | ====Additional Items==== | ||
* Tape | * Tape or cotton | ||
* An insert | * An insert | ||
===Text tutorial | ===Text tutorial<ref>[https://penmodding.pm/archives/431 G3 MX tutorial], Penmodding.pm.</ref>=== | ||
# Cut or file the clip from the G3 cap. | |||
# Remove the G3 tip and original ink tube. Keep the tip and replace the ink tube with an RSVP ink tube. | |||
# Cut the clip | # Poke a hole in the G3 backplug. | ||
# | # Seal the open rear end of the RSVP ink tube with tape or cotton to limit leakage. | ||
# Insert the RSVP ink tube backwards through the backplug hole, refit the backplug, then place the G3 tip on the front of the G3 body. | |||
# Poke a | # Place the HGG grip inside the G3 cap. | ||
# Cut the Anyball grip into four sections. Place one quarter over the G3 grip and one quarter over the G3 cap. | |||
# Add tape to the back of the G3 body, then attach the G3 cap. | |||
# | |||
# | |||
# | |||
# | |||
# Add tape | |||
==References== | ==References== | ||
Latest revision as of 17:07, 3 October 2026
The G3 MX is a single sided mod made by an unknown spinner.
Construction
Parts needed
List adapted from Penmodding.pm:[1]
- 1x G3 (all parts except the ink tube)
- 1x HGG (grip)
- 1x SGM (grip)
- 1x Pentel RSVP (ink tube)
- 1x Dong-A Anyball (grip)
Additional Items
- Tape or cotton
- An insert
Text tutorial[2]
- Cut or file the clip from the G3 cap.
- Remove the G3 tip and original ink tube. Keep the tip and replace the ink tube with an RSVP ink tube.
- Poke a hole in the G3 backplug.
- Seal the open rear end of the RSVP ink tube with tape or cotton to limit leakage.
- Insert the RSVP ink tube backwards through the backplug hole, refit the backplug, then place the G3 tip on the front of the G3 body.
- Place the HGG grip inside the G3 cap.
- Cut the Anyball grip into four sections. Place one quarter over the G3 grip and one quarter over the G3 cap.
- Add tape to the back of the G3 body, then attach the G3 cap.
References
- ↑ G3 MX tutorial
- ↑ G3 MX tutorial, Penmodding.pm.