KAtts Bullet mod: Difference between revisions
From Fen Spinner Wiki
More actions
m →Text tutorial: Removed excessive redirect |
No edit summary |
||
| Line 8: | Line 8: | ||
|cog= cop | |cog= cop | ||
}} | }} | ||
The '''kAtts Bullet mod''' is a double sided mod made by [[kAtts]] which he used in his [[Pen Spinning World Tournament 2017]] participation. | The '''kAtts Bullet mod''' is a double-sided mod made by [[kAtts]] which he used in his [[Pen Spinning World Tournament 2017]] participation. | ||
==Construction== | ==Construction== | ||
| Line 14: | Line 14: | ||
===Parts needed=== | ===Parts needed=== | ||
Parts list from the video below: | |||
* x2 [[Giotto Turbo Maxi]] (2 body) | * x2 [[Giotto Turbo Maxi]] (2 body) | ||
* x2 [[Pilot Dr. Grip]] (grip) | * x2 [[Pilot Dr. Grip]] (grip) | ||
* x2 [[Gel roller]] ( | * x2 [[Gel roller]] (grips) | ||
* x2 Nato bullet 7 | * x2 Nato bullet 7.62×51 mm | ||
* x1/2 [[Dong-A Anyball]] ( | * x1/2 [[Dong-A Anyball]] (grip; 2 for a perfectly symmetrical mod) | ||
* x1 [[Tombow Playcolor2]] (body) | * x1 [[Tombow Playcolor2]] (body) | ||
===Text tutorial=== | ===Text tutorial=== | ||
# Cut | # Cut both Dr. Grip grips in half (keep the side with the lip). | ||
# Cut | # Cut two 3-block pieces of Anyball grip. | ||
# Cut | # Cut 6 cm from the front of your Playcolor2 body. | ||
# Cut the front of your Giotto Turbo Maxi barrel and remove the backplug. | # Cut the front of your Giotto Turbo Maxi barrel and remove the backplug. | ||
# Cut the Gel roller grips to the | # Cut the Gel roller grips to the length of the base of the NATO bullet tips. | ||
# Put the Nato Bullet tips with the Gel roller grips inside the front side of the Giotto Turbo Maxi barrel ( | # Put the Nato Bullet tips with the Gel roller grips inside the front side of the Giotto Turbo Maxi barrel (the tip should stay visible from the outside of the barrel). | ||
# Put 3 blocks of Anyball grips on the Giotto Turbo Maxi barrel (tip side) then | # Put 3 blocks of Anyball grips on the Giotto Turbo Maxi barrel (tip side) then half of a Dr. Grip on the Giotto Turbo Maxi barrel to cover the tip. | ||
# Repeat on the other side and connect using the 6cm of Playcolor2 body. | # Repeat on the other side and connect using the 6cm of Playcolor2 body. | ||
Latest revision as of 10:26, 28 August 2026
The kAtts Bullet mod is a double-sided mod made by kAtts which he used in his Pen Spinning World Tournament 2017 participation.
Construction
Parts needed
Parts list from the video below:
- x2 Giotto Turbo Maxi (2 body)
- x2 Pilot Dr. Grip (grip)
- x2 Gel roller (grips)
- x2 Nato bullet 7.62×51 mm
- x1/2 Dong-A Anyball (grip; 2 for a perfectly symmetrical mod)
- x1 Tombow Playcolor2 (body)
Text tutorial
- Cut both Dr. Grip grips in half (keep the side with the lip).
- Cut two 3-block pieces of Anyball grip.
- Cut 6 cm from the front of your Playcolor2 body.
- Cut the front of your Giotto Turbo Maxi barrel and remove the backplug.
- Cut the Gel roller grips to the length of the base of the NATO bullet tips.
- Put the Nato Bullet tips with the Gel roller grips inside the front side of the Giotto Turbo Maxi barrel (the tip should stay visible from the outside of the barrel).
- Put 3 blocks of Anyball grips on the Giotto Turbo Maxi barrel (tip side) then half of a Dr. Grip on the Giotto Turbo Maxi barrel to cover the tip.
- Repeat on the other side and connect using the 6cm of Playcolor2 body.
Video tutorial
Video tutorial by kAtts.