Ian Jenson mod: Difference between revisions

Latest revision as of 10:11, 28 August 2026

The Ian Jenson mod is a double-sided mod made by Ian Jenson.

Construction

Parts needed

Parts list from the video below:

2x Zebra Airfit BA-9 (tips)
2x Pentel Color Twin (2 big caps, 2 barrels, 1 back plug)
1x Sailor IC Liquid Gel (grip)
1x Pilot Dr. Grip (grip)

Text tutorial

Preparation

Cut 7.4 cm from both Color Twin barrels. Do not include the tip.
Cut both of the big Color Twin caps to 3.7cm.
Cut half of a Dr. Grip grip.
Cut two 3-block pieces of Sailor Gel grip.

Assembly

Connect both Color Twin barrels using a back plug. (tape might be necessary)
Put both Color Twin big caps on the mod base.
Add three blocks of Sailor Gel grip, then half of a Dr. Grip grip.
Put the Zebra Airfit tip inside the Dr. Grip grip.
Repeat on the other side.

Video tutorial

Video tutorial by Oleg.

References

@@ Line 3: / Line 3: @@
 |image={{#setmainimage:Ianjmod.jpg}}
 |creator= Ian Jenson
-|style= [[double Sided]]
+|style= [[Double Sided]]
 |length= 23cm
 |weight= 20.20g
 |cog=
 }}
-The '''Ian Jenson mod''' is a double sided mod made by Ian Jenson.
+The '''Ian Jenson mod''' is a double-sided mod made by Ian Jenson.
 ==Construction==
 ===Parts needed===
-List from video below
+Parts list from the video below:
 * 2x [[Zebra Airfit BA-9]] (tips)
-* 2x [[Pentel Color Twin]] (2 big caps, 2 barrel, 1 backplug)
+* 2x [[Pentel Color Twin]] (2 big caps, 2 barrels, 1 back plug)
 * 1x [[Sailor IC Liquid Gel]] (grip)
 * 1x [[Pilot Dr. Grip]] (grip)
 ===Text tutorial===
-====Mise en place====
+====Preparation====
-# Cut 7.4cm from both [[Pentel Color Twin]] barrels, don't include the tip,.
+# Cut 7.4 cm from both Color Twin barrels. Do not include the tip.
-# Cut both of the big [[Pentel Color Twin]] caps to 3.7cm.
+# Cut both of the big Color Twin caps to 3.7cm.
-# Cut half of [[Pilot Dr. Grip]] grip.
+# Cut half of a Dr. Grip grip.
-# Cut 2x 3 block of [[Sailor IC Liquid Gel]] grip.
+# Cut two 3-block pieces of Sailor Gel grip.
 ====Assembly====
-# Connect both [[Pentel Color Twin]] barrels using a backpkug. (tape might be necessary)
+# Connect both Color Twin barrels using a back plug. (tape might be necessary)
-# Put both [[Pentel Color Twin]] big caps on the mod base.
+# Put both Color Twin big caps on the mod base.
-# Add 3 block of [[Sailor IC Liquid Gel]] grip then half of [[Pilot Dr. Grip]] grip.
+# Add three blocks of Sailor Gel grip, then half of a Dr. Grip grip.
-# Put the [[Zebra Airfit BA-9]] tip inside the [[Pilot Dr. Grip]] grip.
+# Put the Zebra Airfit tip inside the Dr. Grip grip.
-# Repeat on the other side
+# Repeat on the other side.
 ===Video tutorial===