View source for Menowa* G3 (Old version)

{{Mod Infobox
|name=
|image={{#setmainimage:menowaoldg3.jpg}}
|creator= Menowa*
|style= [[Single Sided]]
|length= 20cm
|weight= 18.6g
|cog=
}}
The '''Menowa* G3''' is a personal mod made by Menowa*. As he no longer uses it, its name could be translated as "Former G3" (旧G3).

==Construction==

===Parts needed===
List from the Pm.pm<ref name="Tutorial">https://penmodding.pm/archives/5947</ref>:
* 1x [[Pilot G3|G3]] (barrel and plastic tip)
* 1x [[Zebra Hyperjell|Jimnie]] (cap and grip)
* 1x Zebra Airfit LT GEL/Ballpoint (tip)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Pilot Dr. Grip]] (grip)
* 1x [[Namae]] (Backplug)
* 1x [[Muji Aluminum Pen]] (Tip)
* 1x [[Pentel Color Twin]] (barrel)
* 1x [[Pilot G2]] (Barrel)
* 1x [[Pilot G2]] (tip)
* 1x [[Pentel Hybrid Gel Grip]] (tip)
* 2x [[Zebra Airfit BA-9]] (Metal ring)

====Additional Items====
* Tape
* An insert (or multiple)

===Text tutorial===

====Preparation====
# Cut the clip of the G3 cap and remove the rubber stopper.
# [[G3 Barrel Preparation|Prepare the G3 barrel]], then sand down the front until it's possible to fit an insert under the g2 barrel when connecting.
# Cut 3 blocks of Anyball grip.
# Cut 4.7cm from the front of the G2 barrel.
# Cut 3.2cm from the Jimnie cap.
# Cut the top part of the Namae backplug.
# Cut 0.5 cm of the Dr. Grip grip.
# Cut the big ring, 1 block, 2 blocks and 3 blocks of anyball grip.
# Cut 2.3cm of Ct barrel

====Assembly====
=====Front side=====
# Put the g2 body on the front of the g3 "screw" side first.
# Add the big ring of Anyball grip, an airfit ring, the jimnie cap (Optional: Put an insert underneath), then another airfit ring. 
# Stack the tips in this order if you use LT Ballpoint tip: Airfit LT bp tip, and G1 tip. The tip stack with LT Gel is: HGG tip, Airfit LT gel tip, and G1 tip.
# Put the tip stack in the g2 barrel (it should fit snugly)
# Adjust the jimnie cap, then add 3 block of anyball on the front.

=====Cap side=====
# Put the Muji aluminum tip inside the g3 cap.
# Put the Namae backplug and the cut section of ct barrel inside the cap (Optional: Wrap an insert around the Ct barrel).
# On the cap add the grips in this order: 1 ring of Anyball, 0.5cm of Dr. Grip grip, and 2 blocks of Anyball grip.
# Add tape on the G3 body then connect it to the G3 cap.

==References==
<references />

[[Category:Pen Mods]] [[Category:G3 Mods]]