View source for K7 Hybrid

{{Mod Infobox
|name=
|image={{#setmainimage:K7hybrid.jpg}}
|creator= Orctupus
|style= [[Single Sided]]
|length= 19.5cm
|weight= 16g
|cog=
}}
The '''K7 Hybrid''' is a single sided mod made by [[Orctupus]]. This mod is a hybrid between a [[SEVEN g3]] and a [[KUzu G3 (UPSB ver.)|KUzu G3]]

==Construction==

===Parts needed===
List from UPSB v3<ref name="Tutorial">https://web.archive.org/web/20131102171448/http://www.upsb.info/forum/index.php?showtopic=25117</ref>:
* 1x [[Pilot G3|G3]] (barrel and plastic tip)
* 1x [[Uni-Ball Signo|Signo DX]] (grip and tip)
* 1x [[Uni-Ball Signo|Signo Broad]] (grip and tip)
* 1x [[Pentel Hybrid Gel Grip]] (tip)
* 1x [[Zebra Hyperjell|Hyperjell]] (cap and grip)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Zebra Hyperjell|Jimnie]] (Cap)

====Additional Items====
* Tape
* An insert<br>[[File:k7insert.jpg|left|thumb|300px|Original insert]]<br clear=all>

===Text tutorial===

====Preparation====
# Remove the clip of the Jimnie cap.
# [[G3 Barrel Preparation|Prepare the G3 barrel]] by filing the square and front bump.<br>[[File:Step-1K7H.jpg|left|thumb|300px|]]<br clear=all>
# Cut 0.9 cm of Hyperjell grip.
# Cut 1cm and 0.3cm of Signo Broad grip.

====Assembly====
=====Front side=====
# Stack the Hi-tec grip on the plastic G3 tip, then stack the signo tip onto the Hi-tec tip (Add teflon tape between each tip to make the assembly stable).<br>[[File:Step-2K7H.jpg|left|thumb|300px|]]<br clear=all>
# Add 0.9cm of HyperJell and 1cm of Signo Broad grip on the front of the G3 barrel.
# Add two wraps of Vinyl tape on the ungripped part of the g3 front (should stop at the base of the signo tip)<br>[[File:Step-5K7H.jpg|left|thumb|300px|]]<br clear=all>
# Add the signo dx on the front of the G3 barrel.

=====Cap side=====
# Put the HGG tip inside the signo tip (wrap some teflon tape onto the HGG tip). Put it inside the Jimnie cap.<br>[[File:Step-6K7H.jpg|left|thumb|300px|]]<br clear=all>
# Put 0.3 cm of Signo broad tip then the remaining Hyperjell inside the jimnie cap.<br>[[File:Step-7K7H.jpg|left|thumb|300px]]<br clear=all>
# Add tape on the G3 body then connect it to the Jimnie cap.

===Video Tutorial===
<youtube>https://www.youtube.com/watch?v=jV7k_e4_z64</youtube>

Video Tutorial by Super Nova.

==References==
<references />

[[Category:Pen Mods]] [[Category:G3 Mods]]