Teotoko’s RSVP Mod

Teotoko’s RSVP Mod is a single-sided RSVP mod by Teotoko, measuring 19 cm with a medium weight.

Construction

Parts needed

• 1 Pentel RSVP (barrel, back plug and ink tube)
• 1 Pentel Hybrid Gel Grip (tip and grip)
• 2 Hybrid Gel Roller or Signo tips
• 1 Pilot G2 or Super Grip grip
• 1 Pilot G3 cap
• Electrical tape

Text tutorial

1. Trim and file the clip on the G3 cap. Place one HGR or Signo tip inside the cap.
2. Cut a 0.5 cm piece of HGG grip as shown in the diagram; place the remaining grip inside the cap.

   

   

3. Drill a hole in the RSVP back plug, tape it, and insert it into the barrel. Reverse the RSVP ink tube, close the back and fit the G3 cap.

   

   

4. At the front, fit the 0.5 cm HGG grip section and HGG tip, then wrap electrical tape above it.

   

5. Add the second HGR or Signo tip and place the G2 or Super Grip grip on the front.