SVGiotto
From Fen Spinner Wiki
More actions
The SVGiotto is a double sided mod made by FPSB spinner Ark0nix. This mod is his variation of the Ivan Giotto
Construction
Parts needed
- x2 Giotto Turbo Maxi (2 body and backplug)
- x2 Pilot Dr. Grip (2 grip)
- It is possible to use only one
- x2 Pentel Technica-X (2 tips)
- x4 O-ring
- x1 transparent grip
Additional Items
- Tape
Text tutorial
Preparation
- Cut the front and disassemble both Giotto barrels.
- Cut the Giotto backplug from the ring
- Cut the transparent grip to 2x ~3mm section.
- Cut 1 of the 2 Giotto bodies in half.
- Cut the 2 Dr.Grip grips in half, the flat part will be used.
Assembly
- Put one giotto backplug in each hole of the uncuted Giotto body.
- Add one O-ring on each backplug, and connect the 2 halves of the cut Giotto barrel. (tape might be necessary to hold the parts well)
- On the Giotto barrel, add in this order: an O-ring, the transparent section and a DGG half.
- Put the Technica-X tip inside the DGG grip.
- Repeat on the other side.
Trivia
• This mod was named in a meeting of 2025 after the rapper "SVG", formally Arkhor in FPSB