PARu Bullet Mod

The pARu Bullet Mod is a double-sided power-oriented mod made by JEB spinner pARu. It was made popular by Sututu, the mod was then spreaded to the majority of the current generation of JEB Powertrick prodigy.

Construction

Parts needed

List from video below:

• x2 Giotto Turbo Maxi (2 body)
• x1 Sailor IC Liquid Gel (Grip)
• x4 Daiso Multi-Purpose pens (Grips)
• x2 Dong-A Anyball (Colored grips)
• x2 Dong-A Anyball (Black grips)
• x2 Nato bullet 7,62X51mms
• x1 Crayola SuperTips (Body)

Additional Items

• Tape

Text tutorial

Preparation

1. Disassemble both the Giotto barrel and cut the front and the lip.
2. Cut the Sailor Gel grip to 9 blocks.
3. Cut 4.5 cm of SuperTips barrel.
4. Cut 2x 5 blocks of colored Anyball grip.
5. Cut 4x 3 blocks and 4x 2 blocks of black Anyball grip.
6. Cut 2 of your Multi-Purpose pens grip into 4x 3 block and 2x 1 block

Assembly

1. Put 3 blocks of Anyball grip on the Giotto barrel
2. Put 3 blocks of Anyball grip inside the cut front of the Giotto barrel
3. Place the inverted Nato bullet inside the 3 blocks of Anyball grip
4. Add 2 blocks of Anyball grip on the Nato bullet, then overgrip it with the other 2 blocks of Anyball grip
5. Add one block of Multi-Purpose pens grip on the Giotto barrel, then a whole Multi-Purpose pens grip (it should cover the Nato bullet package)
6. Overgrip the layer of Multi-Purpose pens grip following this order: 3 blocks of Multi-Purpose pens grip, 5 block of colored Anyball grip, then 3 blocks of Multi-Purpose pens grip.
7. Repeat on the other Giotto barrel.
8. Place the Sailor Gel grip on the center of the 4.5 cm SuperTips barrel.
9. Connect everything to the SuperTips barrel. (tape might be required)

Video tutorial

Video tutorial by pARu.