Nesty Bullet mod

The Nesty Bullet mod is a double-sided mod by Nesty, using tips shaped like 7.62 × 51 mm NATO bullets. Its weight varies with the tips used.

Construction

Parts needed

• 2 Giotto Turbo Maxi barrels
• 2 Pilot Dr. Grip HDG-50R grips
• 2 Anyball grips
• A connector, such as about 4 cm of Crayola Supertips barrel
• 2 inert replica tips shaped like 7.62 × 51 mm NATO bullets

Text tutorial

1. Empty both Giotto Turbo Maxi barrels and cut off the writing tips.
2. Cut each Dr. Grip grip to 2.7 cm. Cut two three-block and two six-block sections of Anyball grip.
3. Insert one six-block Anyball section into the front of each barrel, leaving about three blocks exposed.
4. Fit the bullet-shaped tip into the inserted Anyball section in the illustrated orientation. Use inert replica pieces only; never use live ammunition.
5. Fit a three-block Anyball section over each barrel, followed by a Dr. Grip grip section.
6. Join the barrels with the connector; about 4 cm of Supertips barrel should work. The barrel can be shortened if the assembled mod feels too long.