Neptunus Mod

The Neptunus Mod is a pen mod created by FPSB modder VORE-TEX for the JEB spinner VAIN during the production of his X Incipiens Stabilus CV.

Construction

Parts needed

• 2x Stalogy (Backplugs)
• 2x Juice Up (Tips)
• 2x Anyball (grip sections)
• 2x Airblanc (1.9cm grip sections)
• 2x V-Feel 05 (Body and grip)
• 2x Signo/similar (thin grip sections)
• 1x Sarasa (grip)
• 1x Tombow Playcolor2 (body)
• 2x G-Spec/Playborder (Undergrips)

Text tutorial

1. Shorten Stalogy backplugs to 8 or 9mm in total length by cutting.
2. Cut the G-spec/Playborder undergrip to fit over the Stalogy backplugs and place them.
3. Insert the flared ends of the Stalogy backplugs into Juice Up tips.
4. Place a section of Signo or other thin grip over the entire assembly, leaving a section of the tip poking out.
5. Cut V-Feel barrels to 3.6cm.
6. Cut Sarasa grip in half and place on the barrels.
7. Cut and place V-Feel grip to overhang off the end of the V-Feel barrel.
8. Insert the tip package into the V-Feel grip.
9. Cut 1.9cm of Airblanc grip on the ring side and place onto the end of the V-Feel grip.
10. Cut 3 stripes of anyball and place on at the ends on either side.
11. Cut pieces of G-Spec/Playborder grip and place on the Playcolor2 front and backplugs.
12. Mount V-feel barrels on grips and done.