Giotto X

The Giotto X is a double sided mod made by GPC seller Spinworld.

Construction

Parts needed

• 3x Giotto Turbo Maxi (3 barrels)
• 1x Sailor IC Liquid Gel (1 grip)
• 1x Crayola SuperTips (barrel)
• 2x Dr. Grip (1 grip and 2 tips)
• 2x O-rings

Text tutorial

Preparation

1. Cut the Dr.Grip grip in half.
2. Cut 2x 2 blocks of Sailor grip.
3. Cut ~1cm from the 3rd Giotto barrel.
4. Cut the front of the 1st and 2nd giotto barrels.
5. Cut the Supertip barrel to ~4.5cm.

Assembly

1. Put the Dr.Grip tip inside the front of the Giotto barrel.
2. Put in this order on the front side of the Giotto barrel: 2 blocks of Sailor grip, 1 O-ring, and a Dr.Grip half.
3. Repeat on the other side.
4. Put 1cm of Giotto barrel on the center of the Supertip barrel.
5. Connect.